FRAM Drive™
For everyday driving, FRAM Drive™ is the perfect oil filter. Compatible with both synthetic and conventional motor oils, Drive is an efficient, dependable filter built for high performance and protection for up to 7,500 miles (12,000 kilometers).
SHOP NOW
SEARCH
TECHNOLOGY
The FRAM Drive™ engine oil filter features a synthetic blend OE grade media, precision relief valve, nitrile gasket and anti-drainback valve for efficiency and durability.
Provides consistent oil flow, even in cold conditions.
Provides engine protection for up to 7,500 miles (12,000 kilometers)
Allows the filter to retain oil when the vehicle is turned off. Nitrile gasket remains flexible and performs in tough driving conditions and extreme temperatures. **
Internally lubricated sealing gasket for easier filter removal
*FRAM Group testing of filter performance of FD8A and FD7317 under ISO4548- 12
Installation Instructions
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification, viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.
Find more detailed instructions and step-by-step video on changing the oil filter
Related Products
FRAM Titanium™
Oil Filter
FRAM Force™
Oil Filter
FRAM Drive™
Air Filter
FRAM Drive™
Cabin Filter