FRAM DIESEL™
Our most durable oil filter has arrived. Designed with a heavy-duty shell, FRAM Diesel™ oil filters are optimized for use with synthetic oil to deliver 99% filtration efficiency and maximum engine protection for 20,000 miles (32,000 kilometers).
FRAM Diesel™ Oil Filters are available exclusively at Walmart.
 |
OPTIMIZED FOR DIESEL APPLICATIONS |
 |
20,000 MILE PROTECTION |
 |
HEAVY DUTY CONSTRUCTION |
 |
PERFECT SEAL® NO-STICK GASKET |
SHOP NOW
SEARCH
TECHNOLOGYꝉ
Increased thickness to survive the demands of diesel applications
Precision coil spring with glass-fiber-reinforced nylon poppet
Designed for use with synthetic oils.
Synthetic blend media provides optimal diesel performance with lower flow restriction and greater dirt holding capacity.
Silicone anti-drainback valve delivers superior start-up engine protection with up to three times the hot oil resistance. ***
Advanced high temperature nitrile gasket for extended durability. +
ꝉNot all features are available on every part number in the product line. Check the package for specific features of individual filters.
*FRAM Group testing of average filter efficiency of DG3976A, DG9100 and DG10890 or equivalent FRAM DG models under ISO4548-12 99% efficiency at 30 micron OR 98% efficiency at 25 micron
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when
compared to standard nitrile gasket.
Installation Instructions
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification, viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.
Find more detailed instructions and step-by-step video on changing the oil filter
Related Products
FRAM Synthetic Endurance®
Oil Filter
FRAM Ultra Synthetic®
Oil Filter
FRAM Tough Guard®
Oil Filter
FRAM Extra Guard™
Oil Filter