FRAM Synthetic Endurance™
Our most durable oil filter has arrived. Designed with a heavy-duty shell and metal screen back construction in the fully synthetic filter media, FRAM Synthetic Endurance™ oil filters are optimized for use with synthetic oil to deliver 99% filtration efficiency and maximum engine protection for 25,000 miles (40,000 kilometers).
FRAM Synthetic Endurance™ Oil Filters are available exclusively at Walmart.
 |
HIGH-FLOW SYNTHETIC OIL FILTER |
 |
360° TEXTURED GRIP |
 |
PERFECT SEAL® NO-STICK GASKET |
 |
HEAVY DUTY BASE PLATE |
SHOP NOW
SEARCH
TECHNOLOGYꝉ
Fully textured surface for a perfect grip, making installation and removal easier.
Precision coil spring with glass-fiber-reinforced nylon poppet.
Designed for use with synthetic oils. Metal Screen Back construction for enhanced durability. Fully synthetic blend media provides 99%+ filtration efficiency.*
Silicone anti - drainback valve delivers superior start - up engine protection with up to three times the hot oil resistance. **
Perfect Seal® no - stick gasket
1Provides up to 25,000 miles (40,000 kilometers) of protection when used with an appropriate synthetic oil. Follow recommended change intervals as outlined in your owner’s manual.
*FRAM Group testing of average filter efficiency of FE8A, FE3387A and FE4967 or equivalent FRAM TG or EG models under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for FE8A and FE3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
ꝉNot all features are available on every part number in the product line. Check the package for specific features of individual filters.
Installation Instructions
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification, viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.
Find more detailed instructions and step-by-step video on changing the oil filter
Related Products
FRAM Ultra Synthetic®
Oil Filter
FRAM Tough Guard®
Oil Filter
FRAM Ultra Air™
Air Filter
FRAM TrueAir™
Cabin Filter