FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 3.267 |
|---|---|
| Outer Diameter Top (Inch) | 2.539 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Synthetic |
| Inside Diameter Bottom (Inch) | 0.964 |
| O-Ring Inside Diameter (Inch) | 2.874 |
| O-Ring Outside Diameter (Inch) | 3.011 |
| O-Ring Thickness (Inch) | 0.137 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.539 |
| Top Inside Diameter (Inch) | 0.964 |
| Torque Nut | No |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).
- Proven protection for up to 20,000 miles (32,000 kilometers)
- Synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 16-13 DODGE DART L4-1.4L 20-17 FIAT 124 SPIDER L4-1.4L 19-12 FIAT 500 L4-1.4L 20-14 FIAT 500L L4-1.4L 18-16 FIAT 500X L4-1.4L 18-15 JEEP RENEGADE L4-1.4L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF607G Beck/Arnley 041-0856 Carquest 84341 Carquest Premium Filters 84341 Champ P993 Champion COC9713 Champion Filters COC9713 Chrysler 68102241AA Chrysler 68094002AA Defense Filters DL9713 ECOGARD X6162 FERGUSON G7341 Fiat 73500049 Fiat 68102241AA Ford 1565 248 FRAM Drive FD9713 FRAM Extra Guard CH9713 FRAM Tough Guard TG9713 FRAM Ultra Synthetic XG9713 FVP G7341 FVP Filters G7341 General Motors 93177787 Hastings LF669 LUBER-FINER P993 MAHLE OX371DECO Mann-Filter HU713/1X MicroGard MGL57341 Mobil P993 Mopar 68102241AA NAPA 7341 NAPA ProSelect Filters 27341 Opel 5650342 Parts Master 67341X Parts Master 67341 Pennzoil PZ186 Performax PO-186 Premium Guard PG6162 PureZone 8-57341 Purflux L330 Purolator L16162 Service Champ CF6162 STP S9713XL STP S9713 STP Filters S9713XL STP Filters S9713 Suzuki 16511-85C00 Suzuki 16511-85E00 Valvoline VO-116 Warner WP993 Warner Filters WP993 Wix 57341 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.