Back To Search Results

FRAM Extra Guard® Oil Filter

SKU
XG12782
More Information
Height (Inch) 3.93
Outer Diameter Top (Inch) 2.579
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Synthetic
Inside Diameter Bottom (Inch) 1.024
O-Ring Inside Diameter (Inch) 2.866
O-Ring Outside Diameter (Inch) 3.006
O-Ring Thickness (Inch) 0.14
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.579
Top Inside Diameter (Inch) 0.748
Torque Nut No
Washer Inside Diameter (Inch) 0.563
Washer Outside Diameter (Inch) 0.768
Washer Thickness (Inch) 0.059
More Information
Where To Shop
Search
  • Description

    FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).

    • Proven protection for up to 20,000 miles (32,000 kilometers)
    • Synthetic blend media provides 99%+ filtration efficiency*
    • Optimized for synthetic motor oil
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.

    **FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.

    ***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    + FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    22-20 HYUNDAI ACCENT L4-1.6L
    25-21 HYUNDAI ELANTRA L4-1.6L
    25-22 HYUNDAI KONA L4-1.6L
    25-21 HYUNDAI SANTA FE L4-1.6L
    23-20 HYUNDAI SONATA L4-1.6L
    25-22 HYUNDAI TUCSON L4-1.6L
    25-20 HYUNDAI VENUE L4-1.6L
    2025 KIA CARNIVAL L4-1.6L
    2025 KIA K4 L4-1.6L
    24-21 KIA K5 L4-1.6L
    23-20 KIA RIO L4-1.6L
    25-24 KIA SELTOS L4-1.6L
    25-21 KIA SORENTO L4-1.6L
    25-23 KIA SPORTAGE L4-1.6L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Beck/Arnley 041-0888
    Carquest Premium Filters 95325
    FRAM Drive FD12782
    FRAM Extra Guard FCH12782
    FRAM Force FF12782
    FRAM Titanium FS12782
    Hyundai 26350-2M000
    LUBER-FINER P1083
    Mighty Distributing System M9040
    NAPA Gold Filters 100473
    Premium Guard PG99518EX
    Premium Guard Extended Life PG99518EX
    PurolatorONE PL11520
    Service Champ CF1520
    STP S45017
    STP Filters S45017
    Valvoline VO-206
    Wix WL10473
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap, old gaskets/O-Rings, and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install, being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.