FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 3.799 |
|---|---|
| Outer Diameter Top (Inch) | 3.11 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Synthetic |
| Inside Diameter Bottom (Inch) | 1.417 |
| O-Ring Inside Diameter (Inch) | 3.228 |
| O-Ring Outside Diameter (Inch) | 3.369 |
| O-Ring Thickness (Inch) | 0.141 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 3.11 |
| Top Inside Diameter (Inch) | 1.417 |
| Torque Nut | No |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).
- Proven protection for up to 20,000 miles (32,000 kilometers)
- Synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 21-18 FORD F-150 V6-3.0L 20-17 LAND ROVER DISCOVERY V6-3.0L 21-16 LAND ROVER RANGE ROVER V6-3.0L 21-16 LAND ROVER RANGE ROVER SPORT V6-3.0L - Comparison
COMPETITOR NAME COMPETITOR PART # Champ P1045 Ford JL3Z-6731-A Ford 9X2Q-6744-AA FRAM Extra Guard CH12364 FRAM Ultra Synthetic XG12364 Jaguar JDE8751 K&N HP-7043 Land Rover LR124517 Land Rover LR013148 LUBER-FINER P1045 Mann-Filter HU 826X Mobil P1045 Motorcraft FL-2081 NAPA Gold Filters 107490 Parts Master 69883 Premium Guard PG99231EX Purolator L11394 Service Champ CF1394 Service Champ WP1045 STP Filters S11015XL Warner WP1045 Warner Filters WP1045 Wix WL7490 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.