Back To Search Results

FRAM Ultra Synthetic® Oil Filter

SKU
XG11885
More Information
Height (Inch) 4.94
Outer Diameter Top (Inch) 2.078
Anti-Drain Back Valve No
Bypass Relief Valve No
Drain Plug Included Yes
Filter Media Material Synthetic
Inside Diameter Bottom (Inch) 0.748
O-Ring (1) Inside Diameter (Inch) 0.341
O-Ring (1) Outside Diameter (Inch) 0.459
O-Ring (1) Thickness (Inch) 0.118
O-Ring Inside Diameter (Inch) 2.322
O-Ring Outside Diameter (Inch) 2.459
O-Ring Thickness (Inch) 0.137
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.047
Top Inside Diameter (Inch) Closed
Torque Nut No
Washer Inside Diameter (Inch) 0.476
Washer Outside Diameter (Inch) 0.661
Washer Thickness (Inch) 0.059
More Information
Where To Shop
Search
  • Description

    FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).

    • Proven protection for up to 20,000 miles (32,000 kilometers)
    • Synthetic blend media provides 99%+ filtration efficiency*
    • Optimized for synthetic motor oil
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.

    **FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.

    ***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    + FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    2025 BMW 228 XDRIVE GRAN COUPE L4-2.0L
    17-15 BMW I8 L3-1.5L
    20-19 BMW I8 L3-1.5L
    19-16 BMW X1 L4-2.0L
    25-23 BMW X1 L4-2.0L
    19-18 BMW X2 L4-2.0L
    25-24 BMW X2 L4-2.0L
    19-14 MINI COOPER L3-1.5L
    19-14 MINI COOPER L4-2.0L
    19-16 MINI COOPER CLUBMAN L3-1.5L
    19-16 MINI COOPER CLUBMAN L4-2.0L
    24-17 MINI COOPER COUNTRYMAN L3-1.5L
    19-17 MINI COOPER COUNTRYMAN L4-2.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Beck/Arnley 041-0874
    BMW 11 42 8 575 210
    BMW 11 42 8 570 590
    Carquest Premium Filters 95209
    Champ P1035
    ECOGARD X10383
    FRAM Drive FD11885
    FRAM Extra Guard CH11885
    FRAM Tough Guard TG11885
    FRAM Ultra Synthetic XG11885
    LUBER-FINER P1035
    Mann-Filter HU6015ZKIT
    Mobil P1035
    NAPA Gold Filters 107522
    Premium Guard PG99098EX
    Prime Guard PG99098EX
    Purolator L28209
    STP S11885XL
    STP S11885
    STP Filters S11885
    STP Filters S11885XL
    Valvoline VO-166
    Warner WP1035
    Warner Filters WP1035
    Wix WL7522
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.