FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 4.913 |
|---|---|
| Outer Diameter Top (Inch) | 2.598 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Synthetic |
| Inside Diameter Bottom (Inch) | 0.708 |
| O-Ring (1) Inside Diameter (Inch) | 0.807 |
| O-Ring (1) Outside Diameter (Inch) | 0.905 |
| O-Ring (1) Thickness (Inch) | 0.098 |
| O-Ring Inside Diameter (Inch) | 2.913 |
| O-Ring Outside Diameter (Inch) | 3.072 |
| O-Ring Thickness (Inch) | 0.141 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.598 |
| Top Inside Diameter (Inch) | 1.685 |
| Torque Nut | No |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).
- Proven protection for up to 20,000 miles (32,000 kilometers)
- Synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 20-14 JEEP GRAND CHEROKEE V6-3.0L 18-14 RAM 1500 V6-3.0L 2019 RAM 1500 CLASSIC V6-3.0L - Comparison
COMPETITOR NAME COMPETITOR PART # Baldwin P7517 Carquest 94206 Carquest Premium Filters 94206 Champ P1014 Chrysler 68492616AA Chrysler 68109834AA Chrysler 68229402AA Defense Filters DL11794 FERGUSON G68109834AA Fiat K68109834AA Fiat K68229402AA Firestone P1014 FRAM Drive FD11794 FRAM Extra Guard CH11794 FRAM Tough Guard TG11794 FRAM Ultra Synthetic XG11794 FVP G68109834AA FVP Filters G68109834AA Hastings LF696 Jura Filtration SO8044 LUBER-FINER P1014 Mobil P1014 NAPA 100060 NAPA Gold Filters 100060 NAPA ProSelect Filters 2100060 Parts Master WL610060 Pennzoil PZ189 Performax PO-189 Prime Guard POF8157 Prime Guard Filters - Archived POF8157 PUREPRO L38157 PUREPRO PL91014 PUREPRO PL8157 Purolator L38157 Service Champ CF8157 Service Champ WP1014 Sofima S1079PE STP S11794 STP S11794XL STP Filters S11794 STP Filters S11794XL UFI 25.079.01 Valvoline VO-142 Warner WP1014 Warner VO-142 Warner Filters WP1014 Wix WL10060 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.