FRAM Ultra Synthetic® Oil Filter
| Height (Inch) | 3.267 |
|---|---|
| Outer Diameter Top (Inch) | 2.587 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Synthetic |
| Inside Diameter Bottom (Inch) | 1.102 |
| O-Ring Inside Diameter (Inch) | 2.874 |
| O-Ring Outside Diameter (Inch) | 3.007 |
| O-Ring Thickness (Inch) | 0.133 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.587 |
| Top Inside Diameter (Inch) | 1.102 |
| Torque Nut | No |
Search
- Description
FRAM Ultra Synthetic® oil filters are engineered for drivers who are looking for ultimate performance and engine protection. Its dual-layered synthetic blend media provides 99%+ filtering efficiency and protects up to 20,000 miles (32,000 kilometers).
- Proven protection for up to 20,000 miles (32,000 kilometers)
- Synthetic blend media provides 99%+ filtration efficiency*
- Optimized for synthetic motor oil
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of XG8A, XG3387A and XG4967 under ISO 4548-12 for particles greater than 20 microns.
**FRAM Group mulitpass testing of representative sampling of average filter capacity of comparable competitive retail products based on ISO4548-12 for XG8A and XG3387A.
***Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
+ FRAM Group testing per USCAR-36 Low Temperature Leakage test after hot oil, when compared to standard nitrile gasket.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 20-17 GENESIS G80 V6-3.8L 16-15 HYUNDAI GENESIS V6-3.8L 25-20 HYUNDAI PALISADE V6-3.8L 20-17 KIA CADENZA V6-3.3L 21-19 KIA SEDONA V6-3.3L 20-19 KIA SORENTO V6-3.3L 25-20 KIA TELLURIDE V6-3.8L - Comparison
COMPETITOR NAME COMPETITOR PART # Baldwin P40143 Carquest 94719 Carquest Premium Filters 94719 Champ P1026 ECOGARD X10430 FRAM XG11934 FRAM Drive FD11934 FRAM Extra Guard CH11934 FRAM Force FF11934 FRAM Pro FP11934BP FRAM Titanium FS11934 Hastings LF733 Hyundai 26320-3CKB0 K&N HP-7035 Knecht OX355 LUBER-FINER P1026 MAHLE OX255D MAHLE OX355D Mighty Distributing System MX9017 Mobil P1026 Mobil 1 M1C-156A MotoMaster MCH11934 NAPA Gold Filters 100033 Parts Master WL610033 Premium Guard PG99016 Purolator L18179 Service Champ CF8179 STP S11934XL STP Filters S11934XL Valvoline VO-167 Warner WP1026 Warner Filters WP1026 Wix WL10033 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap, old gaskets/O-Rings, and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install, being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.