Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Tough Guard® Oil Filter

Add to Compare
SKU
TG12939
More Information
Height (Inch) 5.649
Outer Diameter Top (Inch) 3.295
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 1.024
O-Ring (1) Inside Diameter (Inch) 2.953
O-Ring (1) Outside Diameter (Inch) 3.095
O-Ring (1) Thickness (Inch) 0.142
O-Ring (2) Inside Diameter (Inch) 0.362
O-Ring (2) Outside Diameter (Inch) 0.466
O-Ring (2) Thickness (Inch) 0.104
O-Ring (3) Inside Diameter (Inch) 0.925
O-Ring (3) Outside Diameter (Inch) 1.027
O-Ring (3) Thickness (Inch) 0.102
O-Ring Inside Diameter (Inch) 0.787
O-Ring Outside Diameter (Inch) 0.891
O-Ring Thickness (Inch) 0.104
O-Rings Included Yes
Outer Diameter Bottom (Inch) 3.295
Top Inside Diameter (Inch) Closed
Torque Nut Yes
Washer Outside Diameter (Inch) 0.768
Washer Thickness (Inch) 0.059
More Information
Where To Shop
Search
  • Description

    FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media provides 99% dirt holding capacity and engineered to perform with conventional and synthetic motor oil.

    • Proven protection for up to 15,000 miles (24,000 kilometers)
    • Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
    • Synthetic blend media provides 99% dirt holding capacity
    • Designed for use with synthetic or conventional motor oils
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of TG8A, TG3387A and TG4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    23-21 JEEP GLADIATOR V6-3.0L
    23-20 JEEP WRANGLER V6-3.0L
    23-20 RAM 1500 V6-3.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Carquest 95464
    Chrysler 68507598AA
    Chrysler 68498720AA
    FRAM CH12939
    LUBER-FINER P1085
    Premium Guard PG99571EX
    PurolatorONE PL31780
    Service Champ CF1780
    STP Filters S45027
    STP Filters S45027XL
    Valvoline VO-207
    Wix WL10614
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap, old gaskets/O-Rings, and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install, being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.