Back To Search Results
FRAM Tough Guard® Oil Filter
SKU
TG12782
| Height (Inch) | 3.93 |
|---|---|
| Outer Diameter Top (Inch) | 2.579 |
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inside Diameter Bottom (Inch) | 1.024 |
| O-Ring Inside Diameter (Inch) | 2.866 |
| O-Ring Outside Diameter (Inch) | 3.008 |
| O-Ring Thickness (Inch) | 0.142 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.579 |
| Top Inside Diameter (Inch) | 0.748 |
| Torque Nut | No |
| Washer Outside Diameter (Inch) | 0.768 |
| Washer Thickness (Inch) | 0.059 |
Where To Shop
Search
Search
- Description
FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media provides 99% dirt holding capacity and engineered to perform with conventional and synthetic motor oil.
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Synthetic blend media provides 99% dirt holding capacity
- Designed for use with synthetic or conventional motor oils
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines
*FRAM Group testing of average filter efficiency of TG8A, TG3387A and TG4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 22-20 HYUNDAI ACCENT L4-1.6L 25-21 HYUNDAI ELANTRA L4-1.6L 25-22 HYUNDAI KONA L4-1.6L 25-21 HYUNDAI SANTA FE L4-1.6L 23-20 HYUNDAI SONATA L4-1.6L 25-22 HYUNDAI TUCSON L4-1.6L 25-20 HYUNDAI VENUE L4-1.6L 2025 KIA CARNIVAL L4-1.6L 2025 KIA K4 L4-1.6L 24-21 KIA K5 L4-1.6L 23-20 KIA RIO L4-1.6L 25-24 KIA SELTOS L4-1.6L 25-21 KIA SORENTO L4-1.6L 25-23 KIA SPORTAGE L4-1.6L - Comparison
COMPETITOR NAME COMPETITOR PART # Beck/Arnley 041-0888 Carquest Premium Filters 95325 FRAM Drive FD12782 FRAM Extra Guard CH12782 FRAM Force FF12782 FRAM Titanium FS12782 FRAM Ultra XG12782 Hyundai 26350-2M000 LUBER-FINER P1083 MicroGard Select MSL10473 Mighty Distributing System M9040 NAPA Gold Filters 100473 Premium Guard Extended Life PG99518EX PurolatorONE PL11520 Service Champ CF1520 STP S45017 STP Filters S45017 Valvoline VO-206 Wix WL10473 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap, old gaskets/O-Rings, and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install, being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.