Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Tough Guard® Oil Filter

Add to Compare
SKU
TG11794
More Information
Height (Inch) 4.913
Outer Diameter Top (Inch) 2.598
Anti-Drain Back Valve No
Bypass Relief Valve No
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.7
O-Ring (1) Inside Diameter (Inch) 0.807
O-Ring (1) Outside Diameter (Inch) 0.905
O-Ring (1) Thickness (Inch) 0.098
O-Ring Inside Diameter (Inch) 2.91
O-Ring Outside Diameter (Inch) 3.051
O-Ring Thickness (Inch) 0.141
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.598
Top Inside Diameter (Inch) 1.685
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media provides 99% dirt holding capacity and engineered to perform with conventional and synthetic motor oil.

    • Proven protection for up to 15,000 miles (24,000 kilometers)
    • Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
    • Synthetic blend media provides 99% dirt holding capacity
    • Designed for use with synthetic or conventional motor oils
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today’s engines

    *FRAM Group testing of average filter efficiency of TG8A, TG3387A and TG4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    20-14 JEEP GRAND CHEROKEE V6-3.0L
    18-14 RAM 1500 V6-3.0L
    2019 RAM 1500 CLASSIC V6-3.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Baldwin P7517
    Carquest 94206
    Carquest Premium Filters 94206
    Champ P1014
    Chrysler 68492616AA
    Chrysler 68109834AA
    Chrysler 68229402AA
    Defense Filters DL11794
    FERGUSON G68109834AA
    Fiat K68109834AA
    Fiat K68229402AA
    Firestone P1014
    FRAM CH11794
    FRAM Drive FD11794
    FRAM Tough Guard TG11794
    FRAM Ultra Synthetic XG11794
    FVP G68109834AA
    Hastings LF696
    Jura Filtration SO8044
    LUBER-FINER P1014
    Mobil P1014
    NAPA 100060
    NAPA ProSelect Filters 2100060
    Parts Master WL610060
    Pennzoil PZ189
    Performax PO-189
    Prime Guard Filters - Archived POF8157
    PUREPRO L38157
    PUREPRO PL91014
    PUREPRO PL8157
    Purolator L38157
    Service Champ CF8157
    Service Champ WP1014
    Sofima S1079PE
    STP S11794
    STP S11794XL
    STP Filters S11794
    STP Filters S11794XL
    UFI 25.079.01
    Valvoline VO-142
    VM International 31152019F
    VM International 31152017F
    Warner WP1014
    Warner Filters WP1014
    Wix WL10060
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.