Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Titanium™ Oil Filter

Add to Compare
SKU
FS3976A
More Information
Height (Inch) 7.131
Outside Diameter (Inch) 3.690
Anti-Drain Back Valve No
Bypass Relief Valve No
Gasket Inside Diameter (Inch) 2.460
Gasket Outside Diameter (Inch) 2.810
Gasket Thickness (Inch) 0.203
Gasket Type Base
Drain Plug Included No
Inlet Type Threaded
Inside Thread Diameter (Inch) 1-16
Thread Size Standard
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Titanium™ advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium™ provides over 99% dirt trapping efficiency.

    • Proven protection for up to 20,000 miles (32,000 kilometers)
    • Dual-layered synthetic blend media provides over 99% filtration efficiency.*
    • FRAM Powerflow™ technology allows for efficient oil flow over the filter media
    • Perfect Seal™ Gasket gives extended durability and temperature protection

    *FRAM Group testing of average filter efficiency of FS8A, FS3387A and FS4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    98-97 CHEVROLET EXPRESS 3500 V6-4.3L
    93-89 DODGE D250 L6-5.9L
    93-89 DODGE D350 L6-5.9L
    09-94 DODGE RAM 2500 L6-5.9L
    10-07 DODGE RAM 2500 L6-6.7L
    07-94 DODGE RAM 3500 L6-5.9L
    10-07 DODGE RAM 3500 L6-6.7L
    10-08 DODGE RAM 4500 L6-6.7L
    10-08 DODGE RAM 5500 L6-6.7L
    93-89 DODGE W250 L6-5.9L
    93-89 DODGE W350 L6-5.9L
    25-11 RAM 2500 L6-6.7L
    25-11 RAM 3500 L6-6.7L
    23-11 RAM 4500 L6-6.7L
    23-11 RAM 5500 L6-6.7L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Carquest Premium Filters 85604
    Carquest Premium Filters 84136
    Carquest Premium Filters 85607
    Carquest Standard Filters R84620MP
    Carquest Standard Filters R84620
    FRAM Extra Guard PH3976A
    FRAM Ultra Synthetic XG3976A
    NAPA Platinum Filters 1607
    Purolator BOSS PBL45335
    STP S3976ML
    Wix 51607
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.