Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Titanium™ Oil Filter

Add to Compare
SKU
FS16
More Information
More Information
Where To Shop
Search
  • Description

    FRAM Titanium™ advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium™ provides over 99% dirt trapping efficiency.

    • Proven protection for up to 20,000 miles (32,000 kilometers)
    • Dual-layered synthetic blend media provides over 99% filtration efficiency.*
    • FRAM Powerflow™ technology allows for efficient oil flow over the filter media
    • Perfect Seal™ Gasket gives extended durability and temperature protection

    *FRAM Group testing of average filter efficiency of FS8A, FS3387A and FS4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.