FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 0.788 |
|---|---|
| Width (Inch) | 10.52 |
| Length (Inch) | 11.753 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 06-01 ACURA MDX V6-3.5L 04-99 HONDA ODYSSEY V6-3.5L 08-03 HONDA PILOT V6-3.5L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco CF160 Baldwin PA4304 Beck/Arnley 042-2017 Bosch P3890WS Carquest 89897 Champ CAF1770 Champion CCF7770 Defense Filters DC054 FVP F4897 FVP F4897C Group 7 C45459P Group 7 C45459 Hastings AFC1204 Hastings AF1204 Honda 80290-S0X-A01 Honda 80290-S0X-A02 Installer Edge CF1026 K&N VF3004 Kleener CAF7770 Kleener FCAF7770 Kleener FCAF1770 Kleener CAF1770 LUBER-FINER CAF1770 LUBER-FINER CAF7770 Mann-Filter MC 1015 MicroGard 3026 Micronair HN00158 Mobil C45459 NAPA 4897 Parts Master 94897 Promotive C45459P Pronto PC-5459 PUREPRO C45459 Purolator C45459 Quaker State PC-54 Service Champ C45459 Service Pro MC45459 Shell - Archived C45459 STP CAF7770M STP CAF1770 STP CAF7770 Valvoline VCA-1013 Valvoline E1AC1013 Wix 24897 - Installation
TOOLS: Phillips-head Screwdriver; 5/16” Nut Driver;
FIRST TIME INSTALLATION: Fine Tooth Saw Blade or a Set of Heavy Duty Wire Cutters
LOCATION OF CABIN FILTER: : On the passenger side of the vehicle behind the glove compartment in the air conditioner evaporator assembly.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- Open the passenger side door and remove passenger side step plate by grabbing under it and pulling it up.
- Remove passenger side lower kick panel by removing a plastic screw toward the floor board and pulling the panel loose.
- Open glove box and remove the stops by gently pushing inward and sliding back towards the rear of the vehicle.
- Using the Phillips-head screwdriver remove the two Phillips-head screws from the hinges at the bottom of the glove box and remove the glove box.
- FIRST TIME INSTALLATION ONLY: Using a fine tooth saw blade or a set of heavy duty wire cutters cut the plastic cross bar at each end on the perforations to remove and discard. DO NOT CUT THE METAL CROSS BRACE.
- Remove the two 5/16” bolts and two Phillips-head screws on each side securing the metal cross brace and remove brace by sliding down.
- Open and remove the cabin filter cover by unlatching the bottom first.
- Remove the dirty filter and replace with the new filter making sure the filter is seated to the left.
- Position the cabin filter cover back in place and make sure it is secured properly.
- Reinstall the metal brace and secure it with the screws you removed earlier.
- Reposition the glove box and reinstall the Phillips-head screws on the bottom and reinstall the stops.
- Reposition the passenger side kick panel and secure it with the plastic screw.
- Snap the passenger side step plate back in position.