Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF8769A
More Information
Height (Inch) 0.768
Width (Inch) 8.865
Length (Inch) 9.338
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    00-97 LEXUS GS300 L6-3.0L
    00-98 LEXUS GS400 V8-4.0L
    2000 LEXUS SC400 V8-4.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco CF144
    Beck/Arnley 042-2077
    Beck/Arnley 042-2116
    Bosch P3729
    Carquest 89894
    Champ CAF1771
    Champion CCF7771
    Defense Filters DC063
    FVP F4894
    FVP F4894C
    Group 7 C35426
    Hastings AFC1218
    Hastings AF1218
    Installer Edge CF1027
    Kleener FCAF1771
    Kleener CAF7771
    Kleener FCAF7771
    Kleener CAF1771
    LUBER-FINER CAF1771
    LUBER-FINER CAF7771
    MicroGard 3027
    MicroGard 3043
    Mobil C35426
    NAPA 4894
    Parts Master 94894
    Premium Guard PC5426
    Purolator C35426
    Quaker State PC-63
    Quaker State C35426
    Shell - Archived C35426
    STP CAF1771
    STP CAF7771
    Toyota 87139-30010
    Valvoline VCA-1024
    Valvoline E1AC1024
    Wix 24894
  • Installation

    TOOLS: Phillips-head screwdriver.

    LOCATION OF CABIN FILTER: Behind glove box

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open hood and disconnect and isolate the battery ground cable. Allow at least 1-1/2 minutes for the air bag backup power to discharge. Leave cable disconnected while doing this procedure.
    2. Open the passenger side door and remove the screws securing the glove box to the dash panel.
    3. Open the glove box and remove the three glove box retaining screws inside the glove box. Then remove the glove box and set it aside.
    4. Look in the void left where the glove box was and find the cabin filter cover. Remove that cover.
    5. Remove the dirty cabin filter by pulling it towards you.
    6. Install the new cabin filter in the housing.
    7. Reinstall and secure the cabin filter cover.
    8. Put the glove box back in place with it open and reinstall the three interior screws you removed earlier.
    9. Close the glove box and install the screws securing the glove box to the dash panel.
    10. Reconnect the battery ground cable.