FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 0.788 |
|---|---|
| Width (Inch) | 4.964 |
| Length (Inch) | 7.683 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 04-96 ACURA RL V6-3.5L - Comparison
COMPETITOR NAME COMPETITOR PART # Beck/Arnley 042-2019 Beck/Arnley 042-2059 FVP F4878 GK Industries CF1030 Honda 79371-SZ3-A01 Kleener FCAF1720 Kleener CAF1720 LUBER-FINER CAF7720 LUBER-FINER CAF1720 MicroGard 3019 Micronair HN96160 NAPA 4878 Power Train 3019 Premium Guard PC5425 Purolator C35425 Valvoline VCA-1060 Wix 24878 - Installation
TOOLS: None required.
LOCATION OF CABIN FILTER: Under the dash behind the glove compartment assembly on the passenger side of the vehicle.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While sitting in the passenger seat remove glove box to gain access to the recirculation housing where the cabin filters (2) will be found.
- Remove the trunk opener main switch connector the self-tapping screws and the glove box back cover.
- Now with the recirculation housing exposed remove the recirculation housing cover.
- Turn the ignition switch to ON and set the recirculation control switch to RECIRCULATE.
- Pull the filter assemblies out of the recirculation housing. Separate the first filter assembly from the second filter assembly. 6. Remove the first filter from the filter assembly.
- Pull the second filter assembly out of the recirculation housing. Remove the second filter from the filter assembly.
- Insert new cabin filters into both the first and the second filter assembly units.
- Re-insert both filter assembly units (one at a time) back into the recirculation housing.
- Reset recirculation switch back to original setting and turn ignition switch OFF.
- Close and secure recirculation housing cover.
- Re-attach the glove box back cover the self-tapping screws and the trunk opener main switch connector.
- Secure the glove box back into its original position.
- Close glove box.