Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

Add to Compare
SKU
CF8603A
More Information
Height (Inch) 1.182
Width (Inch) 3.822
Length (Inch) 11.603
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    03-01 ACURA CL V6-3.2L
    03-99 ACURA TL V6-3.2L
    02-98 HONDA ACCORD L4-2.3L
    02-98 HONDA ACCORD V6-3.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco CF110C
    Baldwin PA4416 KIT
    Bosch P3600WS
    Carquest 90008PT
    Champ CAF1708
    Champion CCF7708
    FVP F4752
    General Motors 12489482
    Group 7 C15390
    Hastings AFC1401
    Hastings AFC1011
    Honda 80291-S84-A01
    K&N VF3006
    Kleener FCAF1708
    Kleener FCAF7708
    Kleener CAF1708
    Kleener CAF7708
    LUBER-FINER CAF7708
    LUBER-FINER CAF1708
    MicroGard 3013
    Micronair HN98104
    NAPA 4752
    Promotive C15390P
    Pronto PC-5390
    PUREPRO C15390
    Purolator C15390
    Service Champ C15390
    STP CAF1708
    STP CAF7708
    SUPERTECH 5765
    Valvoline VCA-1167
    Wix 24752
  • Installation

    TOOLS: Standard and Phillips-head Screwdrivers

    LOCATION OF CABIN FILTER: Under the dash behind the glove compartment on passenger side of vehicle

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. While sitting in the passenger seat open the glove box and remove the two screws under the latch.
    2. Remove the left and right covers to access the screws on the sides of the glove box. Use a standard screwdriver to pry the covers open. The covers are specific to their sides so keep track of which cover belongs to each side.
    3. Remove the left and right side screws.
    4. Close the glove box.
    5. Remove the fuse box cover panel on the outside edge of the dash.
      6. 6. Remove the two screws that secure the right side of the dash panel.
    6. Pull out the panel below the radio - there are no screws securing it.
    7. Remove the screw securing the left side of the dash panel.
    8. Remove the dash panel.
    9. Remove the three screws that go through the top brace into the glove box.
    10. Open the glove box and slowly pull it loose from the dash. Once it pops free disconnect the electrical connector from the glove box. Pull the glove box completely free of the dash and set it aside.
    11. Remove the screws on both ends of the lower metal brace. Do not remove the grounding wire that is bolted to the right side of the brace. Set the brace on the floor and avoid stressing the ground wire.
    12. Remove the filter housing cover by pulling down on the latch at the bottom.
    13. Pull the filter frames out of the housing - starting with the bottom one.
    14. Remove the old filters from their frames.
    15. Put the new filters in the frames.
    16. Insert one of the frames and hold it against the top of the housing to insert the other. Air Flow arrows point towards the driver’s side of vehicle.
    17. Replace the housing cover.
    18. Replace the two screws that secure the lower brace.
    19. Set the glove box loosely in place and reconnect the electrical connector.
    20. Push the glove box into place.
    21. Replace the three screws that go through the top brace into the glove box.
    22. Replace the dash panel.
    23. Replace the screw securing the left side of the dash panel.
    24. Replace the panel below the radio.
    25. Replace the top screw on the outside edge of the dash panel.
    26. Replace the bottom screw on the outside edge of the dash panel.
    27. Replace the fuse box cover panel on the outside edge of the dash.
    28. Replace the four screws that secure the glove box.
    29. Replace the left and right screw covers.