Back To Search Results
FRAM Fresh Breeze® Cabin Air Filter
SKU
CF12508
| Height (Inch) | 0.79 |
|---|---|
| Width (Inch) | 9.45 |
| Length (Inch) | 7.67 |
Where To Shop
Search
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car. - ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Filters up to 98% of dust, pollen and other contaminants
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2019 HYUNDAI IONIQ All 19-17 HYUNDAI IONIQ L4-1.6L 22-17 KIA NIRO L4-1.6L 22-19 KIA NIRO EV All - Comparison
COMPETITOR NAME COMPETITOR PART # Baldwin PA10131 Beck/Arnley 042-2242 Carquest Premium Filters 93970 K&N VF2072 Kia 97133-0Z000 Kia 97133-G2000 LUBER-FINER CAF10002P Mann-Filter CUK24004 NAPA Gold Filters 232064 Premium Guard PC99273 Purolator PureONE C31472 Service Champ CAF10002 STP CAF15009 Valvoline VCA-2068 Warner WCAF10002 Wix WP2064 - Installation
TOOLS: Phillips Screwdriver
LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind the glove compartment.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While sitting in the passenger seat, open the glove box.
- Remove the Phillips head screw which is located on the right side of the glove box connecting the dampener arm. If you have a Lexus GX470, the dampener will be on the right-hand side of the glove box. Remove by sliding it forward.
- Pull the arm free from the glove box.
- Press inward on the sides of the glove box to disengage the stops. If you have a Lexus ES330, RX350 or RX400, you do not press inward on the glove box. You remove the two clips inside the glove compartment by twisting the clips toward the front of the vehicle and removing. The clips are located inside the glove box towards the rear of the at the top. This will allow the glove box to swing all the way to the floor.
- Pull the filter frame straight out from the housing.
- Carefully remove the old filter from the frame.
- Install the new filter in the frame with the air flow arrow pointing down. Be sure it is securely tucked under all the retaining tabs on the top of the frame.
- Slide the frame back into the housing and be sure it snaps securely into place.
- Close the glove box while pressing inward on the sides to re-engage the stops.
- Re-attach the dampener arm.
- Re-install the screw that secures the dampener arm to the glove box and then close glove box.
