Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF12156
More Information
Height (Inch) 0.984
Width (Inch) 7.401
Length (Inch) 7.322
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    17-13 BMW X3 L4-2.0L
    17-11 BMW X3 L6-3.0L
    18-15 BMW X4 L4-2.0L
    18-15 BMW X4 L6-3.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    BMW 64 31 2 284 828
    BMW 64 31 9 312 317
    BMW 64 31 9 327 157
    BMW 64 31 9 312 318
    BMW 64 31 9 237 157
    LUBER-FINER CAF1894C
    LUBER-FINER CAF1894P
    Mann-Filter CUK19004
    MicroGard 4085
    Purolator C38202C
    Wix 24258
  • Installation

    TOOLS: 1/2 inch nut driver

    LOCATION OF CABIN FILTER: Under the hood beneath the cowling on the passenger side of the vehicle.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open the hood.
    2. Pull back the weather stripping from the left side of the cowling.
    3. Unclip the water house from the cowling.
    4. Using a 1/2 nut driver turn the locking nut a quarter turn to unhook the front of the cowling panel.
    5. Unclip the front of the cowling panel to remove it.
    6. Unclip the front of the housing cover to remove it.
    7. Remove the first old filter by pulling it straight up.
    8. Remove the filter frame by unclipping it on the sides.
    9. Remove the second old filter by pulling it straight up.
    10. Install your first new filter into the housing with the air flow indicator arrow pointing down.
    11. Clip the filter frame back onto the housing.
    12. Install your second new filter into the housing with the air flow indicator arrow pointing down.
    13. Clip the housing cover back onto the housing.