Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF12150
More Information
Height (Inch) 1.574
Width (Inch) 10.236
Length (Inch) 8.110
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    24-18 FORD EXPEDITION V6-3.5L
    25-15 FORD F-150 V6-2.7L
    21-18 FORD F-150 V6-3.0L
    23-18 FORD F-150 V6-3.3L
    25-15 FORD F-150 V6-3.5L
    25-15 FORD F-150 V8-5.0L
    25-23 FORD F-150 V8-5.2L
    25-22 FORD F-150 LIGHTNING All
    22-17 FORD F-250 SUPER DUTY V8-6.2L
    22-17 FORD F-250 SUPER DUTY V8-6.7L
    25-23 FORD F-250 SUPER DUTY V8-6.8L
    22-20 FORD F-250 SUPER DUTY V8-7.3L
    22-17 FORD F-350 SUPER DUTY V8-6.2L
    25-17 FORD F-350 SUPER DUTY V8-6.7L
    25-23 FORD F-350 SUPER DUTY V8-6.8L
    24-20 FORD F-350 SUPER DUTY V8-7.3L
    19-18 FORD F-450 SUPER DUTY V10-6.8L
    22-17 FORD F-450 SUPER DUTY V8-6.7L
    22-20 FORD F-450 SUPER DUTY V8-7.3L
    19-18 FORD F-550 SUPER DUTY V10-6.8L
    22-18 FORD F-550 SUPER DUTY V8-6.7L
    22-20 FORD F-550 SUPER DUTY V8-7.3L
    25-18 LINCOLN NAVIGATOR V6-3.5L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ECOGARD XC10491
    Ford FL3Z-19N619-A
    LUBER-FINER CAF1953P
    MicroGard 4107
    Mighty Distributing System CAF2165
    Mobil CAF1953P
    Motorcraft FP-79
    Purolator C38214
    Purolator BOSS PBC38214
    Purolator TECH TC38214
    Service Champ C38214
    Warner WCAF1953
    Wix WP10266
  • Installation

    TOOLS: Phillips-head screwdriver

    LOCATION OF CABIN FILTER: Behind glove compartment.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION

    1. Lower the glove compartment by disconnecting the dampener arm and pushing in on both sides.
    2. Remove plastic trim from the upper portion of the glove compartment.
    3. Remove the screws holding in the upper portion of the compartment. Gently unclip and remove this section.
    4. Disconnect the electrical connector from the left side of the glove compartment.
    5. Locate and remove the cabin filter access door.
    6. Remove the old cabin filter from the housing.
    7. Install new cabin filter.
    8. Replace the cabin filter access door.
    9. Replace the upper portion of the glove compartment and plastic trim.
    10. Swing the glove compartment back into position.