Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF12002
More Information
Height (Inch) 0.984
Width (Inch) 8.228
Length (Inch) 6.456
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    19-14 KIA SOUL L4-1.6L
    19-14 KIA SOUL L4-2.0L
    19-15 KIA SOUL EV All
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-280
    Carquest 91178
    Hyundai 97133-B2000
    Kia 97133-B2000
    LUBER-FINER CAF1921P
    MAHLE LA1126
    Mann-Filter CU21009
    MicroGard 4093
    Mighty Distributing System CAF2163
    NAPA 230178
    Purolator C38208
    Service Champ CAF1921
    STP CAF1921P
    Valvoline VCA-1179
    Warner WCAF1921
    Wix WP10178
  • Installation

    TOOLS: None

    LOCATION OF CABIN FILTER: Behind the glove box

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open the glove box.
    2. Remove the upper panel at the back of the glove box by pulling it straight down.
    3. Unclip the two clips on the bottom of the filter cover to remove.
    4. Remove the old filter by pulling it straight out of the housing.
    5. Install your new filter into the housing with it’s airflow indicator arrow pointing down.
    6. Hook the tabs at the top of the filter cover back onto the housing and re-secure the two bottom clips.