Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11923
More Information
Height (Inch) 0.787
Width (Inch) 5.118
Length (Inch) 11.889
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    07-98 LEXUS LX470 V8-4.7L
    07-06 TOYOTA LAND CRUISER V8-4.7L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-107
    Carquest 89908
    Carquest 90056PT
    Champion CCF1822
    FVP F4908
    LUBER-FINER CAF1822P
    MicroGard 3658
    Premium Guard PC4908
    STP CAF1822P
    Toyota 88568-60010
    Toyota 88565-60010
  • Installation

    Tools: Phillips-head screwdriver

    Location of cabin filter: Behind glove box on the passenger side of the vehicle.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. With the glove box closed remove the two screws at the bottom of the glove box.
    2. Remove the glove box door then disconnect the glove box door damper clip.
    3. Remove the lower finish panel below the glove box.
    4. Release the locking mechanism on the cabin filter cover. Remove the cover.
    5. Your vehicle has two cabin filters. Remove the top filter by pulling it straight out. Remove the bottom cabin filter by sliding it up in the housing and then pulling it out of the housing.
    6. Install your new bottom cabin filter and slide it down into position. Install your new top cabin filter.
    7. Reinstall and secure the cabin filter door.
    8. Reinstall the lower finishing panel.
    9. Reinstall the glove box and the screws securing it.