Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11819
More Information
Height (Inch) 0.788
Width (Inch) 9.968
Length (Inch) 8.904
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    15-12 CHEVROLET CAPTIVA SPORT L4-2.4L
    13-11 CHEVROLET CAPTIVA SPORT V6-3.0L
    17-10 CHEVROLET EQUINOX L4-2.4L
    12-10 CHEVROLET EQUINOX V6-3.0L
    17-13 CHEVROLET EQUINOX V6-3.6L
    17-10 GMC TERRAIN L4-2.4L
    12-10 GMC TERRAIN V6-3.0L
    17-13 GMC TERRAIN V6-3.6L
    17-12 HYUNDAI AZERA V6-3.3L
    2012 HYUNDAI SANTA FE L4-2.4L
    18-13 HYUNDAI SANTA FE V6-3.3L
    2012 HYUNDAI SANTA FE V6-3.5L
    18-13 HYUNDAI SANTA FE SPORT L4-2.0L
    18-13 HYUNDAI SANTA FE SPORT L4-2.4L
    19-13 HYUNDAI SANTA FE XL V6-3.3L
    14-11 HYUNDAI SONATA L4-2.0L
    15-11 HYUNDAI SONATA L4-2.4L
    16-14 KIA CADENZA V6-3.3L
    15-11 KIA OPTIMA L4-2.0L
    15-11 KIA OPTIMA L4-2.4L
    21-15 KIA SEDONA V6-3.3L
    12-11 KIA SEDONA V6-3.5L
    2014 KIA SEDONA V6-3.5L
    10-08 SATURN VUE L4-2.4L
    10-08 SATURN VUE V6-3.5L
    10-08 SATURN VUE V6-3.6L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco CF177
    ACDelco CF1177F
    ATP CF-132
    Baldwin PA4398
    Beck/Arnley 042-2185
    Bosch P3914WS
    Carquest 90211P
    Champ CAF1817P
    Corteco 80004433/CC1453
    ECOGARD XC36179
    FVP F4013
    General Motors 19130294
    General Motors 20901295
    Hastings AFC1359
    Hyundai 3SF79-AQ000
    Hyundai 97133-3SAA0
    K&N VF2016
    Kia 2TF79-AQ000
    Kia 97133-3SAA0
    Kia 97133-A9000
    Kia A9C79-AC000
    Kia 3RF79-AQ000
    Kia 4DF79-AQ000
    Kleener CAF1817P
    LUBER-FINER CAF1817P
    MAHLE LA876
    MicroGard 3727
    Micronair GM07113
    Mighty Distributing System CAF2122
    NAPA 9368
    NAPA 4013
    NAPA 3603924
    Pronto PC-6157
    Purolator C25836
    Service Champ CAF1817
    Service Champ C25836
    STP CAF1817M
    STP CAF1817P
    SUPERTECH 5500
    Valvoline VCA-1075
    Warner WCAF1817
    Wix 49368
    Wix 24013
  • Installation

    Use for filters mounted with metal screws

    TOOLS: Phillips-head Screwdriver.

    LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind the glove box.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. While sitting in the passenger seat, open the glove box.
    2. Remove the three screws securing the top of the glove box assembly.
    3. Close the glove box and remove the three screws securing the bottom of the assembly.
    4. Gently pull outward on the glove box assembly unit until you release the three clips that secure it. The assembly is held in place by three metal clips – one on the left side and two on the right side.
    5. Set the whole assembly aside and out of your working area.
    6. Locate the cabin filter housing access door (the door is secured with latches), unlatch, and open.
    7. Remove old cabin filter by pulling straight out.
    8. Replace with new cabin filter.
    9. Close filter access door by securing latches.
    10. Align the clips on the glove box assembly with the slots located on the frame surrounding the glove box and gently push back into place.
    11. With the glove box open, align the holes and re-insert the top three screws.
    12. Close the glove box and re-insert the bottom three screws.

    Use for filters mounted with plastic tabs

    TOOLS: None required.

    LOCATION OF CABIN FILTER: Behind the glove box on the passenger side of the vehicle.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open glove box.
    2. Remove the two stops on either end of the inside of the glove box. These stops are removed by turning them counterclockwise. Once they are removed the glove box should swing down.
    3. Unlatch the cabin filter cover on the right hand side and remove it.
    4. Remove the dirty filter by pulling it straight out.
    5. Install the new filter.
    6. Re-install the cabin filter cover and make sure it is latched on the right hand side of the cover.
    7. Partially close the glove box and re-install the stops on each side of the glove box by placing them back in the hole and turning them clockwise.
    8. Close the glove box.



    Recycle Logo