Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11775
More Information
Height (Inch) 0.709
Width (Inch) 8.826
Length (Inch) 10.914
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    24-15 FORD EDGE L4-2.0L
    24-15 FORD EDGE V6-2.7L
    18-15 FORD EDGE V6-3.5L
    20-14 FORD FUSION L4-1.5L
    14-13 FORD FUSION L4-1.6L
    20-13 FORD FUSION L4-2.0L
    20-13 FORD FUSION L4-2.5L
    19-17 FORD FUSION V6-2.7L
    20-19 FORD SSV PLUG-IN HYBRID L4-2.0L
    20-17 LINCOLN CONTINENTAL V6-2.7L
    20-17 LINCOLN CONTINENTAL V6-3.0L
    20-17 LINCOLN CONTINENTAL V6-3.7L
    18-16 LINCOLN MKX V6-2.7L
    18-16 LINCOLN MKX V6-3.7L
    20-13 LINCOLN MKZ L4-2.0L
    20-17 LINCOLN MKZ V6-3.0L
    16-13 LINCOLN MKZ V6-3.7L
    23-19 LINCOLN NAUTILUS L4-2.0L
    23-19 LINCOLN NAUTILUS V6-2.7L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-266
    Baldwin PA4475
    Carquest 479962
    Champ CAF1908P
    Champion CCF1908
    Ford DG9Z-19N619-AA
    Ford DG9Z-19N619-A
    Ford DG9H-18D483-BA
    Ford JG9H-18D483-C
    Ford DG9H-18D483-AA
    FVP F0048
    K&N VF2050
    LUBER-FINER CAF1908P
    Mann-Filter CUK28100
    MicroGard 4078
    MicroGard Select 4078HP
    Mighty Distributing System CAF2139
    Mobil 1 CAF1908P
    Motorcraft FP-71
    Motorcraft FP-71A
    Muller Filter FK227
    Premium Guard PC6286
    Purolator C36286
    Purolator BOSS PBC36286
    Ryco RCA330
    Service Champ C36286
    STP CAF1908P
    STP Filters CAF1908M
    SUPERTECH 5260
    Valvoline VCA-1174
    Wix WP10084
  • Installation

    TOOLS: 7mm socket wrench Phillips screwdriver

    LOCATION OF CABIN FILTER: Behind the glove box

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open the glove box and remove the piece of trim on the right side.
    2. Remove the trim above the glove box by unhooking it starting with the right side.
    3. Close the glove box.
    4. Using a 7mm wrench remove the two bolts that secure the bottom of the glove box assembly.
    5. Using a 7mm wrench remove the two bolts that secure the top of the glove box assembly.
    6. Open the glove box.
    7. Pull out on the glove box assembly to unclip it from the vehicle.
    8. Tilt the glove box assembly and set it on it’s side to expose the connector on the back.
    9. There is a tab on the top of the light connector that will disconnect it from the light.
    10. Remove the two Phillips screws from the sides of the filter cover to open it.
    11. Pull out on the old filter to remove it from the housing.
    12. Install your new filter into the housing with it’s airflow indicator arrow pointing down.
    13. Sit the glove box assembly on it’s side and reconnect the light connector to the back of the glove box.
    14. Clip the glove box assembly back onto the vehicle and make sure it is secure.
    15. Reinstall the two bolts at the top of the glove box assembly.
    16. Reinstall close the glove box.
    17. Reinstall the two bolts at the bottom of the glove box assembly.
    18. Open the glove box.
    19. Clip the trim panel above the glove box back onto the vehicle.
    20. Clip the trim panel to the right of the glove box back onto the vehicle.
    21. Close the glove box.