Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11672
More Information
Height (Inch) 0.847
Width (Inch) 4.078
Length (Inch) 9.811
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    13-10 MAZDA 3 L4-2.0L
    13-10 MAZDA 3 L4-2.3L
    13-10 MAZDA 3 L4-2.5L
    14-10 MAZDA 3 SPORT L4-2.0L
    13-10 MAZDA 3 SPORT L4-2.5L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-223
    Carquest 90264P
    Champion CCF1878
    FVP F4046
    LUBER-FINER CAF1878P
    Mazda BBM4-61-J6X
    MicroGard 4016
    NAPA 4046
    Premium Guard PC6098
    Premium Guard PC6090
    Purolator C16098
    Service Champ C16098
    STP Filters CAF1878M
    STP Filters CAF1878P
    Valvoline VCA-1094
    Wix 24046
  • Installation

    TOOLS: Phillips-head screwdriver

    LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Look under the glove box and remove the plastic panel above the foot well. It is held in place by two clips nearest to the seat. The plastic panel may also have some lighting hooked to it if so un-clip that also.
    2. Next pop out the center console panel. Do this by gently prying from the side closest to the shifter and slide it back towards the shifter once the clips are out.
    3. Where you removed the center console panel you should see the cabin filter cover. Remove the three Phillips-head screws securing the cover and remove the cover.
    4. Remove the first filter by sliding the bottom filter out. Remove the second or top filter by sliding it out also.
    5. Put the new filters in the housing so they stack like the filters you removed.
    6. Replace the cabin filter door and replace the screws that secure it.
    7. Replace the center console panel.
    8. Replace the plastic panel above the foot well.