Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11666
More Information
Height (Inch) 0.788
Width (Inch) 6.757
Length (Inch) 9.771
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    12-09 HYUNDAI ELANTRA L4-2.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Carquest 90248P
    FVP F97133-2L000
    Hyundai 08790-2L000A
    LUBER-FINER CAF1893P
    NAPA 4270
    Wix 24270
  • Installation

    TOOLS: None.

    LOCATION OF CABIN FILTER: On the passenger side of the vehicle behind the glove box.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open the glove box.
    2. Unclip the damper rod from the right side of the glove box.
    3. Remove the two stops on either side of the glove box by pushing in on them from the outside.
    4. Unclip the right side of the housing cover to remove it.
    5. Pull the old filter straight out of the housing to remove it and install the new filter.