FRAM Fresh Breeze® Cabin Air Filter

TOOLS: Standard screwdriver

LOCATION OF CABIN FILTER: On the passenger side of the vehicle behind the glove box.

REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

1. Open the passenger side door. Open the glove box.
2. Remove the dampener cord from the right hand side of the glove box
3. Push in on each side of the glove box one side at a time until the glove box stops are disengaged.
4. Once the stops are disengaged allow the glove box to swing down towards the floor out of the way.
5. Carefully pull the glove box shelf from the instrument panel by carefully pulling it to you to disengage the 4 retainers
6. Remove the cabin filter cover by disengaging the tab on the left and using a screwdriver to disengage the tab on the top in the middle. Remove the cover by opening it on its right side hinge and sliding the cover out from the hinge on the right side until it fully disengages.
7. Remove the dirty filter by pulling it straight out and replace it with a new filter.
8. Re-install the cabin filter cover by engaging the hinge on the right side and closing it and locking the tabs on top and left hand side.
9. Reinstall the glove box shelf.
10. . Swing the glove box back into position and reinstall the dampener cord.
11. Re-engage the glove box stops.
12. Close the glove box.