Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11176
More Information
Height (Inch) 0.984
Width (Inch) 7.447
Length (Inch) 8.865
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    15-12 FORD EXPLORER L4-2.0L
    19-16 FORD EXPLORER L4-2.3L
    19-11 FORD EXPLORER V6-3.5L
    19-10 FORD FLEX V6-3.5L
    19-13 FORD POLICE INTERCEPTOR SEDAN V6-3.5L
    19-13 FORD POLICE INTERCEPTOR SEDAN V6-3.7L
    19-14 FORD POLICE INTERCEPTOR UTILITY V6-3.5L
    19-13 FORD POLICE INTERCEPTOR UTILITY V6-3.7L
    20-19 FORD POLICE RESPONDER HYBRID L4-2.0L
    18-14 FORD SPECIAL SERVICE POLICE SEDAN L4-2.0L
    17-13 FORD TAURUS L4-2.0L
    19-09 FORD TAURUS V6-3.5L
    16-10 LINCOLN MKS V6-3.5L
    16-10 LINCOLN MKS V6-3.7L
    16-13 LINCOLN MKT L4-2.0L
    19-10 LINCOLN MKT V6-3.5L
    19-10 LINCOLN MKT V6-3.7L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-221
    Bosch P3910WS
    Carquest 90273P
    Champ CAF1885P
    Champion CCF1885
    Ford AE9Z-19N619-A
    FVP F4068
    GK Industries CF1230
    Hastings AFC1500
    K&N VF1011
    Kleener FCAF1885P
    LUBER-FINER CAF1885P
    MAHLE LA720
    MicroGard 4018
    Mighty Distributing System CAF2127
    Motorcraft FP-68
    NAPA 4068
    Performax PC-113
    Premium Guard PC4068
    Promotive C26155P
    Pronto PC-4068
    Purolator C26155
    Purolator BOSS PBC26155
    Service Champ C26155
    STP CAF1885P
    STP CAF1885M
    SUPERTECH 5255
    Valvoline VCA-1118
    Wix 24068
  • Installation

    TOOLS: None required

    LOCATION OF CABIN FILTER: On the passenger side of the vehicle behind the glove box.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. To remove the glove box there are two hinge pins that must be removed from the bottom of the glove box. Pull the pins towards the center of the glove box to remove them.
    2. Open the glove box.
    3. There is a dampener cord on the left side of the glove box that must be released. Pull down on the dampener cord to free it from the glove box then push from the inside of the glove box to release it.
    4. Pull up on the glove box to remove it from its hinges and set it aside.
    5. Unhook the tabs at the bottom of the cabin filter housing cover to remove it.
    6. Remove the old filter from the housing by pulling it straight out.
    7. Insert your new filter into the housing with its airflow indicator arrow pointing down.
    8. Reinstall the filter cover by hooking the top tabs into the housing and latching the bottom tabs.
    9. Pull the dampener cord out so that you can reconnect it to the glove box.
    10. There are three hooks on the bottom edge of the glove box that hook onto three tabs on the bottom of the assembly. Re-hinge the glove box and make sure it is completely secured to the assembly.
    11. Close the glove box.
    12. Reinstall the two hinge pins on the bottom of the glove box.