Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF11172
More Information
Height (Inch) 0.965
Width (Inch) 5.713
Length (Inch) 9.456
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    09-04 NISSAN QUEST V6-3.5L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-110
    Beck/Arnley 042-2051
    Champ CAF1829P
    Champion CCF1829
    FVP F4855
    FVP F9265
    Hastings AFC1251
    Kleener FCAF1829P
    Kleener CAF1829P
    LUBER-FINER CAF1829P
    MAHLE LAK772S
    MicroGard 3056
    NAPA 4855
    Nissan 27299-5Z000
    Parts Master 94855
    Premium Guard PC4855
    Purolator C15868
    Service Champ C15868
    Valvoline VCA-1159
    Wix 24855
  • Installation

    TOOLS: Phillips-head and Standard Screwdrivers.

    LOCATION OF CABIN FILTER: Behind glove compartment behind cabin filter access door on the passenger side of the vehicle.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open the glove compartment and remove the bottom three screws and top four screws securing the glove compartment.
    2. Remove the glove compartment and set aside.
    3. There is an electrical connector that may need to be unplugged to access the screws securing the cabin filter access door. Unplug if needed and remove the screws securing the cabin filter access door and the door itself.
    4. Pull first filter out. To remove the second filter lift up and slide out.
    5. Install the first new filter by sliding in and pushing down.
    6. Install the second new filter by sliding it on top of the first filter.
    7. Complete installation by reversing steps 1 through 3. Remember to reconnect the electrical connection if you unplugged it.