Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

Add to Compare
SKU
CF10900
More Information
Height (Inch) 1.182
Width (Inch) 4.531
Length (Inch) 9.023
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    10-01 CHRYSLER PT CRUISER L4-2.4L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Champion CCF1861
    Chrysler 05058040AA
    Chrysler 5058040AA
    Fiat K05058040AA
    FVP F4725
    GK Industries CF1146
    Hastings AFC1353
    LUBER-FINER CAF1861P
    MAHLE LA180
    Mann-Filter CU2329
    MicroGard 3728
    NAPA 4725
    Premium Guard PC4725
    Purolator C15857
    Service Champ C15857
    Valvoline VCA-1036
    Wix 24725
  • Installation

    *Special note: 2001 PT Cruisers do not have filter housing to install filter. On 2001 models the filter housing would have to be purchased from the dealer and installed on vehicle before filter can be installed. On all other models the housing should be in the vehicle but a filter may not be installed. On these vehicles you will just install a filter in the existing housing.

    TOOLS: Phillips-head screwdriver possibly a flat blade screwdriver or blade; ratchet set or nut driver set

    LOCATION OF CABIN FILTER: Under the hood on the passenger side of the vehicle under the cowling.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Open hood and secure open using the prop rod on the right hand side of the vehicle.
    2. Using the Phillips-head screwdriver remove the 3 screw clips and bases from the passenger side cowling.
    3. Using the Phillips-head screwdriver remove the 1 screw and base on the left side of the passenger side cowling. You may need to gently pry the base loose with the flat blade screwdriver or blade.
    4. Remove the rubber stop on the left side of the cowling and pull up on the cowling to unclip it from the vehicle.
    5. Slide the right side of the cowling out from under the driver side cowling to remove it
    6. Using the proper size socket and ratchet or nut driver loosen the 2 bolts on the left side of the washer fluid reservoir but do not remove them.
    7. Using the proper size socket and ratchet or nut driver loosen the 1 bolt on the right side of the washer fluid reservoir but do not remove it.
    8. Tilt the reservoir forward to get to the cabin filter housing and remove the cover.
    9. Remove the dirty filter if the vehicle has one; if not just install the new filter with air flow arrow printed on filter pointing towards the cab of the vehicle.
    10. Reinstall the filter cover and make sure that the 2 tabs on the bottom of the cover fit into the slots on the bottom of the housing and secure the cover at the top.
    11. Tighten the 3 bolts on the right and left side of the washer fluid reservoir.
    12. Reinstall the passenger side cowling making sure that the tabs on the top of the cowling fit into the slots on the vehicle under the windshield.
    13. Make sure the cowling is completely seated and reinstall the rubber stop on the left side of the cowling.
    14. The right side of the cowling slides under the driver side cowling to lock in place.
    15. Tuck the front edge of the cowling under the weather stripping.
    16. Reinstall the base on the left hand side of the cowling and then slide the screw into the base.
    17. Reinstall the 3 bases along the front edge of the cowling and then slide the 3 screws into the bases.
    18. Unhook the rod propping the hood open and secure back into position and close the hood.