FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 1.180 |
|---|---|
| Width (Inch) | 9.020 |
| Length (Inch) | 10.200 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 25-23 GENESIS ELECTRIFIED G80 All 23-19 GENESIS G70 L4-2.0L 2024 GENESIS G70 L4-2.5L 23-19 GENESIS G70 V6-3.3L 24-21 GENESIS G80 L4-2.5L 20-18 GENESIS G80 V6-3.3L 25-21 GENESIS G80 V6-3.5L 20-17 GENESIS G80 V6-3.8L 20-17 GENESIS G80 V8-5.0L 22-17 GENESIS G90 V6-3.3L 25-23 GENESIS G90 V6-3.5L 21-17 GENESIS G90 V8-5.0L 25-22 GENESIS GV70 L4-2.5L 25-22 GENESIS GV70 V6-3.5L 25-21 GENESIS GV80 L4-2.5L 25-21 GENESIS GV80 V6-3.5L 2025 GENESIS GV80 COUPE V6-3.5L 2011 HYUNDAI EQUUS V8-4.6L 16-12 HYUNDAI EQUUS V8-5.0L 16-09 HYUNDAI GENESIS V6-3.8L 12-09 HYUNDAI GENESIS V8-4.6L 16-12 HYUNDAI GENESIS V8-5.0L 20-19 HYUNDAI SANTA FE L4-2.0L 20-19 HYUNDAI SANTA FE L4-2.4L 20-19 KIA K900 V6-3.3L 21-18 KIA STINGER L4-2.0L 23-22 KIA STINGER L4-2.5L 23-18 KIA STINGER V6-3.3L 25-20 KIA TELLURIDE V6-3.8L - Comparison
COMPETITOR NAME COMPETITOR PART # Beck/Arnley 042-2147 Champion CCF1867 Forecast CAF242P FVP F4300 GK Industries CF1179 Hastings AFC1503 Hyundai 08790-3M000A Hyundai 97133-3M000 K&N VF2061 Kleener FCAF1867P LUBER-FINER CAF1867P LUBER-FINER CAF1876P MAHLE LA618 MicroGard 4012 Micronair HY05999 Mighty Distributing System CAF2075 NAPA 4300 Purolator C36067 STP CAF1867P STP Filters CAF1876MHP STP Filters CAF1876M STP Filters CAF1876P Valvoline VCA-1062 Wix 24300 - Installation
TOOLS: None required.
LOCATION OF CABIN FILTER: On the passenger side of the vehicle behind the glove box.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While sitting in the passenger seat open the glove box.
- Lower the glove box by removing the glove box stoppers located on the right and left sidewalls of the glove box. Remove the stoppers by pulling each clip toward the rear of the vehicle and toward the center of the glove box. (On certain vehicles you may have to unfasten the glove box lift which is located on the outside sidewall of the glove box.)
- Allow the glove box to swing completely downward on its hinge.
- With the filter housing access door now visible remove the door by pinching the tabs together and unclipping it from the housing.
- Remove the old cabin filter by pulling straight out of the housing.
- Install new cabin filter.
- Clip the filter housing access door back into its original position. Be sure it is secure.
- Bring glove box up to align holes and re-insert both left and right glove box stoppers. (Do not forget to re-connect glove box lift if vehicle is equipped with one.)
- Close the glove box.