FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 1.182 |
|---|---|
| Width (Inch) | 7.939 |
| Length (Inch) | 9.889 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 12-07 HYUNDAI VERACRUZ V6-3.8L - Comparison
COMPETITOR NAME COMPETITOR PART # ATP CF-144 Beck/Arnley 042-2103 Champ CAF1855P Champion CCF1855 Forecast CAF210P FVP F4753 GK Industries CF1164 Hyundai 97133-3J000 Hyundai 97133-2B005 Hyundai 08790-3J000A Kleener CAF1855P Kleener FCAF1855P LUBER-FINER CAF1855P MicroGard 3704 Micronair HY04999 NAPA 4753 Premium Guard PC4753 Purolator C35861 Service Champ C35861 STP CAF1855P Valvoline VCA-1144 Warner WCAF1855 Wix 24753 - Installation
TOOLS: Phillips-head Screwdriver.
LOCATION OF CABIN FILTER: On the passenger side of the vehicle under the dash behind the glove box.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While sitting in the passenger seat open the glove box.
- Remove the glove box stoppers which can be found on both the right and left inside sidewalls of the glove box.
- Remove the screw that secures the glove box dampener which is located on the right outside wall of the glove box.
- Let the glove box swing completely downward.
- Now with the filter housing access door exposed remove door by pushing inward the upper and lower tabs which secure the door.
- Remove old cabin filter by pulling straight out.
- Install new cabin filter.
- Replace filter housing access door by snapping back into its original position.
- Bring glove box up to a comfortable position to re-attach the side dampener.
- Align glove box to reset both glove box stoppers.
- Close glove box.