Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF10731
More Information
Height (Inch) 0.827
Width (Inch) 7.919
Length (Inch) 10.717
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    13-09 SUZUKI GRAND VITARA L4-2.4L
    08-06 SUZUKI GRAND VITARA V6-2.7L
    10-09 SUZUKI GRAND VITARA V6-3.2L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-141
    Beck/Arnley 042-2154
    Champ CAF1870P
    Forecast CAF199P
    FVP F4200
    GK Industries CF1125
    Kleener CAF1870P
    Kleener FCAF1870P
    LUBER-FINER CAF1870P
    MAHLE LA617
    NAPA 4200
    Parts Master 94475
    Purolator C25853
    STP CAF1870P
    Suzuki 95861-54J00
    Suzuki 95861-64J00
    Suzuki 95861-64J01
    Valvoline VCA-1109
    Wix 24200
  • Installation

    TOOLS: None required.

    LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind the glove box.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Unlatch and open hood. Disconnect the negative (-) cable at the battery.
    2. While sitting in the passenger seat open the glove box.
    3. To lower the glove box push in on both side panels to clear the glove box stops.
    4. Let the glove box swing all the way downward.
    5. Now with the filter housing access door exposed unfasten the locking clasp which is securing the filter housing access door.
    6. Remove the door.
    7. Remove the old cabin filter by pulling straight out.
    8. Install new cabin filter.
    9. Set the filter housing access door back into its original position and lock clasp.
    10. Bring the glove box back into position by pressing in on both sides until the glove box stops re-engage.
    11. Close glove box.
    12. Re-connect negative (-) cable at the battery.
    13. Close hood.

    Note: For some models you may have to enable the air bag system after installing your new cabin filter.

    Refer to: Enabling Air Bag System: Advanced Air Bag in your owner’s manual.