Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF10728
More Information
Height (Inch) 0.788
Width (Inch) 7.722
Length (Inch) 9.417
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    11-08 HYUNDAI ACCENT L4-1.6L
    16-11 HYUNDAI ELANTRA L4-1.8L
    10-07 HYUNDAI ELANTRA L4-2.0L
    16-14 HYUNDAI ELANTRA L4-2.0L
    2013 HYUNDAI ELANTRA COUPE L4-1.8L
    2014 HYUNDAI ELANTRA COUPE L4-2.0L
    2013 HYUNDAI ELANTRA GT L4-1.8L
    17-14 HYUNDAI ELANTRA GT L4-2.0L
    16-14 KIA FORTE L4-1.8L
    18-14 KIA FORTE L4-2.0L
    17-14 KIA FORTE KOUP L4-1.6L
    17-14 KIA FORTE KOUP L4-2.0L
    18-14 KIA FORTE5 L4-1.6L
    18-14 KIA FORTE5 L4-2.0L
    17-14 KIA RONDO L4-2.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ATP CF-173
    ATP CF-250
    Beck/Arnley 042-2093
    Bosch P3745WS
    Carquest 90207P
    Carquest 9020P
    Champ CAF1846P
    Champion CCF1846
    FVP F5910
    FVP F9377
    GK Industries CF1200
    Hastings AFC1447
    Hyundai 97133-2H001
    Hyundai 97133-2H000
    Hyundai 08790-2H000A
    K&N VF2037
    Kia A7F79-AQ000
    Kia 97133-2H001
    Kleener CAF1846P
    Kleener FCAF1846P
    LUBER-FINER CAF1846P
    Mann-Filter MC1050
    MicroGard 4044
    MicroGard 3703
    Micronair HY03999
    Mighty Distributing System CAF2064
    NAPA 9377
    NAPA ProSelect Filters 2230083
    Performax PC-93
    Power Train 3703
    Premium Guard PC5660
    Pronto PC-5660
    Purolator C35660
    Purolator BOSS PBC35660
    Service Champ C35660
    STP CAF1846M
    STP CAF1846P
    SUPERTECH 6005
    Valvoline VCA-1051
    Wix 49377
    Wix WP10083
  • Installation

    TOOLS: None required.

    LOCATION OF CABIN FILTER: Behind the glove box.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. Sit in the passenger side seat and open the glove box.
    2. Look for two stops inside each side of the glove box. Remove these stops by prying them out on the end closest to you and remove them toward you.
    3. Once both stops are removed look on outside of the right hand side of the glove box and you while see a retaining arm. Remove this arm by prying it loose.
    4. Allow the glove box to swing down on its bottom hinge.
    5. Above the panel behind where the glove box was you will see a cabin filter cover. Unlatch this cover on the right hand side by pinching the latch and opening the cover and removing it.
    6. Remove dirty filter by pulling it straight out. Slide the new filter in the housing.
    7. Reattach the cover by sliding the left side hinge in the slot and closing the cover securing the latch on the right hand side.
    8. Lift the glove box and partially close it and reattach the retaining arm on the right hand side. Make sure it is fully engaged on the pin.
    9. Reinstall the two stops inside the glove box by closing the glove box until the hole where the stop was removed aligns with the hole on the glove box assembly. Once these are aligned slide the stop into the hole and push the stop towards the back of the glove box until the stop is secured in place.
    10. Close the glove box.