FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 1.852 |
|---|---|
| Width (Inch) | 7.604 |
| Length (Inch) | 8.313 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 13-07 SUZUKI SX4 L4-2.0L 2012 SUZUKI SX4 CROSSOVER L4-2.0L - Comparison
COMPETITOR NAME COMPETITOR PART # ATP CF-191 Beck/Arnley 042-2092 Champ CAF1883P FVP F9700 GK Industries CF1177 GK Industries CF1039 Hastings AFC1522 LUBER-FINER CAF1883P MAHLE LA682 Mann-Filter CU21004 Parts Master 94902 Pronto PC-6089 Purolator C26089 Suzuki 95860-80J00 Valeo 715652 Valvoline VCA-1117 Wix 49700 - Installation
TOOLS: None required.
LOCATION OF CABIN FILTER: Behind glove box on the passenger side of vehicle.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While sitting in the passenger seat open the glove box.
- Unhook the dampener arm from the right side of the glove box.
- Pull out on the glove box to unhook it from its hinges. You will hear the glove box disengage from the hinges.
- Push in on the right side of the glove box and tilt it down to clear the stop and remove it.
- With the filter now visible push inward on the four tabs to release the filter from the housing.
- Install the new filter with the airflow indicator arrow pointing down.
- Reinstall the glove box and press down on the insides until the hinges snap back into places.
- Re-attach the dampener arm to the right side of the glove box.
- Close the glove box.