FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 1.182 |
|---|---|
| Width (Inch) | 3.802 |
| Length (Inch) | 10.835 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 01-00 INFINITI I30 V6-3.0L 04-02 INFINITI I35 V6-3.5L 01-00 NISSAN MAXIMA V6-3.0L 03-02 NISSAN MAXIMA V6-3.5L - Comparison
COMPETITOR NAME COMPETITOR PART # ATP CF-54 Baldwin PA4199 Beck/Arnley 042-2038 Bosch C3895WS Champ CAF1803P Champion CCF1803 Champion CCF7792 Defense Filters DC093C FVP F4823 FVP F4823C GK Industries CF1084 Hastings AF1237 Hastings AFC1237 Kleener CAF1803P Kleener FCAF1803P LUBER-FINER CAF1803C LUBER-FINER CAF1803P MicroGard 3913 Micronair NN00192 NAPA 4823 Nissan B7200-3Y000 Parts Master 94823 Power Train 3913 Premium Guard PC1033 Promotive C16112P Pronto PC-1033 Purolator C16112C STP CAF1803P Valvoline VCA-1096 Wix 24823 - Installation
TOOLS: Needle-nose Pliers Phillips-head Screwdriver and Standard Screwdriver.
LOCATION OF CABIN FILTER: On the passenger side of the vehicle behind the glove box.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While leaning into the passenger side of the vehicle (with glove box closed) remove the two screws at the bottom of the glove box that secure the unit to the vehicle.
- Open the glove box and remove the four screws that secure the top of the unit to the vehicle. This includes removing the latch.
- Pull down on the glove box to unhook it from the vehicle.
DO NOT DISCONNECT THE YELLOW AIR BAG CONNECTORS FROM EACH OTHER OR ALLOW THE GLOVE BOX TO HANG FROM OR STRESS THE YELLOW AIR BAG CONNECTION OR WIRES. - Using pliers unclip the airbag sensor box.
- Remove the glove box light connector.
- Remove the glove box from the vehicle.
- Using a standard screw driver pry the metal clip that secures the filter cover to the housing.
- Slide the filter cover up and remove it.
- Remove the two old filters from the housing.
- Insert the first new filter and hold it towards the top of the housing by its tabs.
- Insert the second filter into the housing.
- Reinstall the cover by sliding it down.
- Reinstall the metal clip that secures the cover to the housing.
- While holding the glove box reconnect the airbag sensor box and light connector.
- Snap the glove box back into place.
- Reinstall the four screws at the top of the glove box. Make sure to reinstall the latch.
- Reinstall the two screws at the bottom of the glove box.