FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 0.985 |
|---|---|
| Width (Inch) | 3.960 |
| Length (Inch) | 8.826 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 10-04 INFINITI QX56 V8-5.6L 15-05 NISSAN ARMADA V8-5.6L 14-12 NISSAN NV2500 V8-5.6L 14-12 NISSAN NV3500 V8-5.6L 15-04 NISSAN TITAN V8-5.6L - Comparison
COMPETITOR NAME COMPETITOR PART # ATP CF-58 Beck/Arnley 042-2052 Blue Print ADN12525 Bosch P3891WS Champ CAF1804C Champion CCF1804 FVP F4854 FVP F4854C GK Industries CF1058 Hastings AFC1282 Hastings AFC1341 INFINITI 27298-ZR00A K&N VF1002 Kleener CAF1804P Kleener FCAF1804C Kleener CAF1804C Kleener FCAF1804P LUBER-FINER CAF1804C LUBER-FINER CAF1804P MAHLE LAK771S MicroGard 3058 MicroGard 4066 Micronair NN04186 Mighty Distributing System CAF2096C NAPA 4854 Nissan 27298-7S600 Nissan 999M1-VP055 Nissan 27277-VP00A Nissan 999M1-VP005 Nissan 27298-ZR00A Parts Master 94854 Performax PC-100 Power Train 3058 Premium Guard PC1043 Pronto PC-1043 Purolator C15850 Purolator AQ1095 STP CAF1804C Valvoline VCA-1048 Wix 24854 - Installation
TOOLS: Phillips-head Screwdriver.
LOCATION OF CABIN FILTER: On the passenger side of the vehicle behind the glove box.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- With glove box closed look under the glove box and remove the two screws at the bottom of the glove box securing the glove compartment frame to the dash panel.
- Open the glove box and remove the two top screws at each end of the glove box.
- Remove the two bottom screws that are located to the center of the glove box on the strike plate. (You do not need to remove the top screws on the strike plate.)
- Gently remove the glove compartment and assembly.
- Locate the cabin filter cover and remove the screw securing it and then remove the cover.
- Remove the dirty cabin filters by sliding the first filter straight out and then the second filter slide it to the left and then straight out.
- Replace the dirty filters by inserting the first clean filter in the housing and sliding to the right.
- Insert the second filter straight into the housing.
- Reposition the cabin filter cover and re-install the screw that secures the cover..
- Reposition the glove box assembly with the glove box open and snap it back in place.
- With the glove box open re-install the two top screws on each end of the glove box assembly. Also install the two screws in the center of the glove box securing the strike plate
- Close the glove box and re-install the two screws on the bottom of the glove box