FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 0.906 |
|---|---|
| Width (Inch) | 8.826 |
| Length (Inch) | 11.662 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 08-06 BUICK LUCERNE V6-3.8L 11-09 BUICK LUCERNE V6-3.9L 11-06 BUICK LUCERNE V8-4.6L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco CF138 Champion CCF7742 FVP F4812C FVP F4812 General Motors 15811562 K&N VF3001 Kleener FCAF7742 LUBER-FINER CAF7742 MAHLE LA763 MicroGard 4006 Micronair GM00107 Premium Guard PC5477 Promotive C35668P Purolator C35668 STP CAF7742 Valvoline VCA-1022 Valvoline VCA-1165 Valvoline E1AC1022 Wix 24812 - Installation
TOOLS: Not required.
LOCATION OF CABIN FILTER: In front of the windshield under the filter access cover on the passenger side of the vehicle.
- Open vehicle hood to expose filter housing which is located on the passenger side cowling.
- Open housing by unsnapping the filter cover.
- Locate the filter retainer latch located on the left side of the filter housing holding the filter in place. Push the retaining latch toward the passenger side and pull the old filter up and toward the front of the vehicle to remove.
- Slide the new filter into the frame and be sure it is seated completely. There is a cut in the sidewall of the filter so that the smaller side can be folded “down and under” to seat properly in the housing.
- Close filter housing cover making sure that it is latched and secure so water cannot enter the housing.
- Close hood.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.