Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF10141
More Information
Height (Inch) 1.340
Width (Inch) 4.334
Length (Inch) 16.784
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    09-05 CHEVROLET EQUINOX V6-3.4L
    09-08 CHEVROLET EQUINOX V6-3.6L
    09-06 PONTIAC TORRENT V6-3.4L
    09-08 PONTIAC TORRENT V6-3.6L
    07-02 SATURN VUE L4-2.2L
    2007 SATURN VUE L4-2.4L
    03-02 SATURN VUE V6-3.0L
    07-04 SATURN VUE V6-3.5L
    09-07 SUZUKI XL-7 V6-3.6L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco CF137
    ACDelco CF109
    ACDelco CF135
    ATP CF-30
    Baldwin PA4340
    Bosch P3630WS
    Carquest 89872
    Champ CAF1762
    Champion CCF7762
    Defense Filters DC047
    Driveworks DW-25490
    FVP F4872C
    FVP F4872
    General Motors 89031232
    General Motors 22665802
    General Motors 15781507
    Group 7 C25490
    Hastings AFC1206
    Hastings AF1206
    Kleener CAF1762
    Kleener FCAF1762
    LUBER-FINER CAF7762
    LUBER-FINER CAF1762
    MAHLE LA737
    MicroGard 3039
    Micronair GM05113
    Micronair GM02113
    NAPA 4872
    Parts Master 94872
    Performax PC-47
    Premium Guard PC5490
    Promotive C25490
    Pronto PC-5490
    PUREPRO C25490
    Purolator C25490
    Service Champ C25490
    Service Pro MC25490
    STP CAF1762
    STP CAF7762
    Suzuki 95861-78J11
    Valvoline VCA-1030
    Valvoline E1AC1030
    VIPER 10141C
    Wix 24872
  • Installation

    TOOLS: May need Standard Screwdriver or Phillips-head Screwdriver.

    LOCATION OF CABIN FILTER: In front of the windshield under the cowl vent screen on the passenger side of the vehicle.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. With the hood closed remove the exposed clips or screws securing the passenger side cowling. The cowling can be secured in one of two ways: with a pin that you need to pry the center out with a standard screw driver; or a screw type pin that you will need to use a Phillips-head screwdriver to unscrew.
    2. Open the hood. You will see more pins or screws securing the bottom of the passenger cowling. Use either a standard screwdriver or Phillips-head screwdriver to remove as mentioned above.
    3. Gently lift up on the passenger side cowling to reveal the cabin filter housing.
    4. Remove the old filter from the housing.
    5. Insert the new filter into the frame with the air flow directional arrow pointing toward the rear of the vehicle. (This arrow is printed on the side of the filter). When you are installing the filter in the housing the passenger side end of the filter must be inserted in a way so the last pleat is locked into place by the retaining tab on the housing.
    6. You also need to make sure that the driver side end of the filter is tucked under the retaining tab on that side of the housing.
    7. Return the passenger side cowling to its original position so the holes in the cowl align with the holes in the metal frame of the vehicle.
    8. Re-install the clips you removed under the hood.
    9. Close the hood.
    10. Re-install the cowling clips you removed with the hood closed.