FRAM Fresh Breeze® Cabin Air Filter
| Height (Inch) | 1.143 |
|---|---|
| Width (Inch) | 4.393 |
| Length (Inch) | 8.904 |
Search
- Description
FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.
- Filters up to 98% of dust, pollen and other contaminants
- ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
- Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
- Installs on average in 15 minutes
1. Road dust and pollen particles ranging in size from 5-100 microns.
2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* Always follow OE recommended change intervals.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 2006 ACURA CSX L4-2.0L 00-97 ACURA EL L4-1.6L 05-02 ACURA EL L4-1.7L 06-02 ACURA RSX L4-2.0L 05-03 HONDA CIVIC L4-1.3L 05-01 HONDA CIVIC L4-1.7L 05-02 HONDA CIVIC L4-2.0L 06-02 HONDA CR-V L4-2.4L 11-03 HONDA ELEMENT L4-2.4L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco CF110 ATP CF-39 Baldwin PA4195 KIT Beck/Arnley 042-2015 Bosch P3711WS Carquest 90018PT Champ CAF1758 Champion CCF7758 Defense Filters DC040 Driveworks DW-15439 FVP F4817C FVP F4817 General Motors 89031233 Group 7 C15439P Hastings AF1213 Hastings AF1146 Hastings AFC1213 Honda 80292-S5D-406 Honda 80292-SCV-A01 Honda 80292-S5A-003 Honda 80292-S5D-A01 K&N VF2022 Kleener FCAF1758 Kleener CAF1758 LUBER-FINER CAF1758 LUBER-FINER CAF7758 MAHLE LAK122S MAHLE LA728S MicroGard 3037 Micronair HN01111 NAPA 4817 Parts Master 94817 Performax PC-40 Premium Guard PC5439 Promotive C15439P Pronto PC-5439 Purolator C15439 Purolator BOSS PBC15439 Service Champ C15439 STP CAF1758 STP CAF1758M SUPERTECH 5755 Valvoline VCA-1012 Valvoline E1AC1012 Wix 24817 - Installation
TOOLS: Standard Screwdriver.
LOCATION OF CABIN FILTER: Behind the glove box.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
- While sitting in the passenger seat open the glove box.
- Look inside the glove box and you will see two glove box stops - one on each side of the glove box. Using a standard screwdriver gently pry the stops loose from the inside of the glove box while pushing inward on the outside of the stop to remove it. The stops should remove to the inside.
- Once both stops are removed allow the glove box to hang down toward the floor on its bottom hinge.
- Now look into the space where you just removed the glove box and you will see a rectangular shaped door. Unlatch the door from the left hand side open and remove.
- Behind the door will be two plastic frames housing the filters. Remove the first one by pulling it straight out by the tab on the frame.
- Remove the second frame that is on the right by using the tab on the frame to slide it to the left which will allow you to remove it by pulling straight out.
- Remove both dirty filters from their frames by pushing them out of the frame and replace with new filters. When putting the new filters in the frame make sure the air flow arrow printed on the side of the filter is pointing down.
- Reinstall the filters and frames back into the housing. With the air flow arrow on the housing pointing down insert the frame with the tab facing you and to the left slide it back into the housing and then using the tab slide it to the right.
- With the air flow arrow on the housing pointing down install the second frame with the tab facing you and to the right and slide it straight back into the housing.
- Reinstall the door by sliding the tab on the right of the door into the slot on the right hand side of the housing. Close the door and fasten the latch closed.
- Lift the glove box up on its hinges and with the glove box mostly closed reinstall the stops on
the right and left hand side by inserting them into position through the inside of the glove box and snap them into place. Note: The rubber tip of the stop that is sticking on the outside of the glove box is intended to stop the glove box from opening too far so when reinstalling the stops this tip will need to be behind both the left and right hand side of the glove box frame.
- Close the glove box.