Back To Search Results

FRAM Fresh Breeze® Cabin Air Filter

SKU
CF10132
More Information
Height (Inch) 0.709
Width (Inch) 8.550
Length (Inch) 8.747
More Information
Where To Shop
Search
  • Description

    FRAM® Fresh Breeze cabin air filters can keep up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing properties of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle’s air conditioning, heating and ventilation system can become concentrated and expose passengers to road dust, dirt and allergens at higher levels than outside the car.

    • Filters up to 98% of dust, pollen and other contaminants
    • ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning outside air flowing through the vehicle’s ventilation system
    • Helps protect your vehicle's heating and air conditioning unit while also keeping it working efficiently
    • Installs on average in 15 minutes

    1. Road dust and pollen particles ranging in size from 5-100 microns.
    2. Deodorizing tests used isovaleric acid (sweaty odors), geosmin (earthy odors) and dog hairs.
    3. ARM & HAMMER, the ARM & HAMMER logo and distinct orange trade dress are trademarks of Church & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
    * Always follow OE recommended change intervals.

     

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    06-04 LEXUS ES330 V6-3.3L
    09-06 LEXUS GX470 V8-4.7L
    09-07 LEXUS RX350 V6-3.5L
    08-06 LEXUS RX400H V6-3.3L
    04-00 TOYOTA AVALON V6-3.0L
    06-02 TOYOTA CAMRY L4-2.4L
    06-02 TOYOTA CAMRY V6-3.0L
    06-04 TOYOTA CAMRY V6-3.3L
    06-04 TOYOTA SIENNA V6-3.3L
    10-07 TOYOTA SIENNA V6-3.5L
    08-04 TOYOTA SOLARA L4-2.4L
    08-04 TOYOTA SOLARA V6-3.3L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco CF162
    ATP CF-44
    Beck/Arnley 042-2024
    Bosch P3785WS
    Carquest 89883
    Carquest 90118PT
    Champ CAF1766
    Defense Filters DC048
    Driveworks DW-35479
    FVP F4883
    Hastings AFC1225
    K&N VF2002
    Kleener FCAF1766
    Kleener CAF1766
    LUBER-FINER CAF1766
    MAHLE LA647
    MicroGard 3711
    MicroGard 3041
    Micronair TY00145
    Mighty Distributing System CAF1766
    Mitsubishi MZ312931
    NAPA 4883
    Parts Master 94883
    Parts Master 94875
    Performax PC-60
    Performax PC-48
    Premium Guard PC5516
    Premium Guard PC5479
    Pronto PC-5667
    Pronto PC-5479
    Purolator C35479
    Purolator BOSS PBC35479
    Service Champ C35479
    Service Pro MC35479
    STP CAF1766
    STP CAF1766M
    Toyota 87139-YZZ05
    Toyota 87139-YZZ19
    Toyota 87139-06030
    Valvoline E1AC1014
    VIPER 10132C
    Wix 24883
  • Installation

    TOOLS: Phillips Screwdriver

    LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind the glove compartment.

    REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

    1. While sitting in the passenger seat open the glove box.
    2. Remove the Phillips head screw which is located on the right side of the glove box connecting the dampener arm.
    3. If you have a Lexus GX470 the dampener will be on the right-hand side of the glove box. Remove by sliding it forward.
    4. Pull the arm free from the glove box.
    5. Press inward on the sides of the glove box to disengage the stops. If you have a Lexus ES330 RX350 or RX400 you do not press inward on the glove box. You remove the two clips inside the glove compartment by twisting the clips toward the front of the vehicle and removing. The clips are located inside the glove box towards the rear of the at the top. This will allow the glove box to swing all the way to the floor.
    6. Pull the filter frame straight out from the housing.
    7. Carefully remove the old filter from the frame.
    8. Install the new filter in the frame with the air flow arrow pointing down. Be sure it is securely tucked under all the retaining tabs on the top of the frame.
    9. Slide the frame back into the housing and be sure it snaps securely into place.
    10. Close the glove box while pressing inward on the sides to re-engage the stops.
    11. Re-attach the dampener arm.
    12. Re-install the screw that secures the dampener arm to the glove box and then close glove box.