Back To Search Results
FRAM Force™ Oil Filter
SKU
FF9999
| Height (Inch) | 5.138 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Bottom Inside Diameter (Inch) | 1.614 |
| Filter Media Material | Cellulose/Synthetic Blend |
| O-Ring (1) Inside Diameter (Inch) | 1.535 |
| O-Ring (1) Outside Diameter (Inch) | 1.653 |
| O-Ring (1) Thickness (Inch) | 0.118 |
| O-Ring (2) Inside Diameter (Inch) | 0.256 |
| O-Ring (2) Outside Diameter (Inch) | 0.394 |
| O-Ring (2) Thickness (Inch) | 0.138 |
| O-Ring Inside Diameter (Inch) | 3.287 |
| O-Ring Outside Diameter (Inch) | 3.429 |
| O-Ring Thickness (Inch) | 0.142 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.874 |
| Top Inside Diameter (Inch) | 1.614 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.559 |
| Washer Outside Diameter (Inch) | 0.78 |
| Washer Thickness (Inch) | 0.078 |
Where To Shop
Search
Search
- Description
FRAM FORCE™ oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions. Its synthetic blend media provides 99%+ filtering efficiency and protects up to 15,000 miles. Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Proven protection for up to 15,000 miles
- Synthetic blend media provides 99% dirt holding capacity
- Designed for use with synthetic or conventional motor oils
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today's engines
*FRAM Group testing of average filter efficiency of FF8A, FF3387A and FF4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 09-07 HYUNDAI AZERA V6-3.3L 09-06 HYUNDAI AZERA V6-3.8L 10-07 HYUNDAI ENTOURAGE V6-3.8L 09-07 HYUNDAI SANTA FE V6-3.3L 10-06 HYUNDAI SONATA V6-3.3L 12-07 HYUNDAI VERACRUZ V6-3.8L 09-07 KIA AMANTI V6-3.8L 09-06 KIA SEDONA V6-3.8L 09-08 KIA SORENTO V6-3.3L 09-07 KIA SORENTO V6-3.8L - Comparison
COMPETITOR NAME COMPETITOR PART # A.L. Solutions U.S. ALO-8148 ACDelco PF2261 Auto Extra 61857061 Baldwin P7400 Beck/Arnley 041-8192 Bosch 3411 Bosch 72246WS Carquest R84061 Carquest 84061 Carquest Premium Filters 84061 Casite Filters CF615 Certified CCH9999 Champ P972 Champ P972XL Champion 55061T Champion COC9999 Champion Filters COC9999 Champion Filters 55061T Defense Filters DL9999 Driveworks DW-5610 ECOGARD X5610 FERGUSON G7061 Firestone P972 FRAM Drive FD9999 FRAM Titanium FS9999 FRAM Tough Guard TG9999 FRAM Ultra Synthetic XG9999 FVP G7061 Group 7 V5610 Hastings LF615 Hastings LF615F Hyundai 26320-3C100 Inter-Continental Gear & Brake ALO-8148 Kia 26320-3C100 LUBER-FINER P972 Magneti Marelli 1AMFL00017 MAHLE OX773D Mann-Filter ML 1037 MicroGard MGL9999 MicroGard MGL57061 Mighty Distributing System M972 Mobil 1 M1C-454 Mobil 1 M1C-454A MotoMaster MCH9999 NAPA 7061 Parts Master 67061 Pennzoil PZ164 Pentius PCB9999 Performax PO-164 Pit Stop PSL56 Premium Guard PG5610 Prime Guard Filters - Archived POF5610 Promotive PH5610 Pronto PO-5848 PureZone 8-57061 Purolator L35610 Purolator PL35610 Purolator PureONE PL35610 Purolator TECH TL35610 PurolatorONE PL35610 Quaker State QS45519 Service Champ CF5610 Silverline 27061 STP S9999 STP Filters S9999 STP Filters S9999XL Valvoline VO-90 VIPER 9999 Wix 57061 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.