Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Force™ Oil Filter

Add to Compare
SKU
FF12812
More Information
Height (Inch) 2.52
Outer Diameter Top (Inch) 2.579
Anti-Drain Back Valve No
Bypass Relief Valve No
Gasket Inside Diameter (Inch) 2.898
Gasket Outside Diameter (Inch) 3.149
Gasket Thickness (Inch) 0.126
Filter Media Material Cellulose/Synthetic Blend
Inside Diameter Bottom (Inch) 0.984
O-Ring Inside Diameter (Inch) 0.591
O-Ring Outside Diameter (Inch) 0.709
O-Ring Thickness (Inch) 0.118
O-Rings Included Yes
Outer Diameter Bottom (Inch) 2.579
Top Inside Diameter (Inch) 1.004
Torque Nut No
Washer Inside Diameter (Inch) 0.563
Washer Outside Diameter (Inch) 0.768
Washer Thickness (Inch) 0.059
More Information
Where To Shop
Search
  • Description

    FRAM FORCE™ oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions. Its synthetic blend media provides 99%+ filtering efficiency and protects up to 15,000 miles. Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures

    • Proven protection for up to 15,000 miles
    • Synthetic blend media provides 99% dirt holding capacity
    • Designed for use with synthetic or conventional motor oils
    • Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today's engines

    *FRAM Group testing of average filter efficiency of FF8A, FF3387A and FF4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    25-21 HYUNDAI ELANTRA L4-2.0L
    25-22 HYUNDAI KONA L4-2.0L
    25-20 HYUNDAI SONATA L4-2.0L
    2025 KIA K4 L4-2.0L
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    Carquest 95332
    FRAM CH12812
    FRAM Tough Guard TG12812
    FRAM Ultra Synthetic XG12812
    Hyundai 263502J000
    LUBER-FINER P1099
    NAPA Gold Filters 100521
    Premium Guard PG99602EX
    PurolatorONE PL11760
    Service Champ CF1760
    STP Filters S45028
    STP Filters S45028XL
    Valvoline VO-216
    Wix WL10521
  • Installation
    1. Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
    2. Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
    3. Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.