Back To Search Results
FRAM Force™ Oil Filter
SKU
FF12059
| Height (Inch) | 6.1 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Bottom Inside Diameter (Inch) | 0.889 |
| Filter Media Material | Cellulose/Synthetic Blend |
| O-Ring Inside Diameter (Inch) | 2.535 |
| O-Ring Outside Diameter (Inch) | 2.637 |
| O-Ring Thickness (Inch) | 0.138 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.114 |
| Top Inside Diameter (Inch) | 0.889 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.472 |
| Washer Outside Diameter (Inch) | 0.669 |
| Washer Thickness (Inch) | 0.059 |
Where To Shop
Search
Search
- Description
FRAM FORCE™ oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions. Its synthetic blend media provides 99%+ filtering efficiency and protects up to 15,000 miles. Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Proven protection for up to 15,000 miles
- Synthetic blend media provides 99% dirt holding capacity
- Designed for use with synthetic or conventional motor oils
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today's engines
*FRAM Group testing of average filter efficiency of FF8A, FF3387A and FF4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 18-16 BMW 340I L6-3.0L 19-17 BMW 340I GT XDRIVE L6-3.0L 18-16 BMW 340I XDRIVE L6-3.0L 20-17 BMW 440I L6-3.0L 21-17 BMW 440I GRAN COUPE L6-3.0L 20-17 BMW 440I XDRIVE L6-3.0L 20-17 BMW 440I XDRIVE GRAN COUPE L6-3.0L 2018 BMW 540D XDRIVE L6-3.0L 23-17 BMW 540I L6-3.0L 26-17 BMW 540I XDRIVE L6-3.0L 26-25 BMW 550E XDRIVE L6-3.0L 19-18 BMW 640I XDRIVE GRAN TURISMO L6-3.0L 25-16 BMW 740I L6-3.0L 22-17 BMW 740I XDRIVE L6-3.0L 25-24 BMW 740I XDRIVE L6-3.0L 22-20 BMW 745E XDRIVE L6-3.0L 22-20 BMW 745LE XDRIVE L6-3.0L 25-24 BMW 750E XDRIVE L6-3.0L 26-20 BMW 840I L6-3.0L 25-20 BMW 840I GRAN COUPE L6-3.0L 26-20 BMW 840I XDRIVE L6-3.0L 25-20 BMW 840I XDRIVE GRAN COUPE L6-3.0L 21-17 BMW M240I L6-3.0L 25-23 BMW M240I L6-3.0L 25-17 BMW M240I XDRIVE L6-3.0L 25-20 BMW M340I L6-3.0L 25-20 BMW M340I XDRIVE L6-3.0L 25-21 BMW M440I L6-3.0L 25-22 BMW M440I GRAN COUPE L6-3.0L 25-21 BMW M440I XDRIVE L6-3.0L 25-22 BMW M440I XDRIVE GRAN COUPE L6-3.0L 26-18 BMW X3 L6-3.0L 25-19 BMW X4 L6-3.0L 26-19 BMW X5 L6-3.0L 26-20 BMW X6 L6-3.0L 26-19 BMW X7 L6-3.0L 26-20 BMW Z4 L6-3.0L 25-24 INEOS GRENADIER L6-3.0L 26-20 TOYOTA GR SUPRA L6-3.0L - Comparison
COMPETITOR NAME COMPETITOR PART # BMW 11 42 8 583 898 BMW 11 42 7 826 799 FRAM Extra Guard CH12059 LUBER-FINER P1070 PurolatorONE PL41404 STP Filters S90186 STP Filters S90186XL UFI 25.148.00 Wix WL10342 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.