Back To Search Results
FRAM Force™ Oil Filter
SKU
FF10515
| Height (Inch) | 4.055 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve | No |
| Bottom Inside Diameter (Inch) | 0.748 |
| Filter Media Material | Cellulose/Synthetic Blend |
| O-Ring (1) Inside Diameter (Inch) | 0.315 |
| O-Ring (1) Outside Diameter (Inch) | 0.453 |
| O-Ring (1) Thickness (Inch) | 0.138 |
| O-Ring (2) Inside Diameter (Inch) | 0.433 |
| O-Ring (2) Outside Diameter (Inch) | 0.531 |
| O-Ring (2) Thickness (Inch) | 0.098 |
| O-Ring Inside Diameter (Inch) | 2.913 |
| O-Ring Outside Diameter (Inch) | 3.059 |
| O-Ring Thickness (Inch) | 0.146 |
| O-Rings Included | Yes |
| Outer Diameter Bottom (Inch) | 2.598 |
| Top Inside Diameter (Inch) | 0.478 |
| Torque Nut | No |
| Washer Inside Diameter (Inch) | 0.563 |
| Washer Outside Diameter (Inch) | 0.768 |
| Washer Thickness (Inch) | 0.059 |
Where To Shop
Search
Search
- Description
FRAM FORCE™ oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions. Its synthetic blend media provides 99%+ filtering efficiency and protects up to 15,000 miles. Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Proven protection for up to 15,000 miles
- Synthetic blend media provides 99% dirt holding capacity
- Designed for use with synthetic or conventional motor oils
- Includes gaskets and O-rings manufactured to endure the high pressures and high temperatures in today's engines
*FRAM Group testing of average filter efficiency of FF8A, FF3387A and FF4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 11-10 HYUNDAI AZERA V6-3.3L 11-09 HYUNDAI AZERA V6-3.8L 2011 HYUNDAI EQUUS V8-4.6L 16-12 HYUNDAI EQUUS V8-5.0L 14-09 HYUNDAI GENESIS V6-3.8L 12-09 HYUNDAI GENESIS V8-4.6L 14-12 HYUNDAI GENESIS V8-5.0L 16-10 HYUNDAI GENESIS COUPE V6-3.8L 2009 HYUNDAI SANTA FE V6-3.3L 10-09 HYUNDAI SONATA V6-3.3L 12-07 HYUNDAI VERACRUZ V6-3.8L 2009 KIA AMANTI V6-3.8L 11-09 KIA BORREGO V6-3.8L 11-09 KIA BORREGO V8-4.6L 17-15 KIA K900 V6-3.8L 17-15 KIA K900 V8-5.0L 10-08 KIA SEDONA V6-3.8L 09-08 KIA SORENTO V6-3.3L 09-08 KIA SORENTO V6-3.8L - Comparison
COMPETITOR NAME COMPETITOR PART # Baldwin P7364 Beck/Arnley 041-0846 Beck/Arnley 041-0847 Beck/Arnley 041-0825 Bosch 72257WS Bosch 3848 Carquest 84250 Carquest R84029 Carquest 84042 Carquest R84250 Carquest 84029 Carquest Premium Filters 84250 Carquest Premium Filters 84042 Carquest Premium Filters 84029 Casite Filters CF642 Champ P982 Champ P994 Champion COC10515 Champion Filters COC10515 Defense Filters DL10515 ECOGARD X5848 FERGUSON G7029 Forecast OF69 FRAM Drive FD10515 FRAM Extra Guard CH10515 FRAM Titanium FS10515 FRAM Tough Guard TG10515 FRAM Ultra Synthetic XG10515 FVP G7029 Hastings LF642 Hastings LF654 Hastings LF642F Hyundai 26320-3C30A Hyundai 26300-3C250 Hyundai 26320-3F100 Hyundai 26320-3C300 Hyundai 26320-3C250 Hyundai 26320-3C700 K&N PS-7029 K&N HP-7029 Kia 26320-3C30A Kia 26320-3F100 Kia 26320-3C300 Kia 26320-3C250 LUBER-FINER P982 LUBER-FINER P994 MAHLE OX 351D ECO MAHLE OX351DECO MicroGard MGL10515 MicroGard MGL57029 MicroGard MGL57250 Mighty Distributing System MX982 Mobil 1 M1C-255 Mobil 1 M1C-255A NAPA 7029 NAPA 7042 NAPA 7250 Parts Master 67029 Parts Master 67250 Pennzoil HPZ-174 Pennzoil PZ174 Performax S10515XL Performax PO-174 Premium Guard PG5848A Premium Guard PG5848 Promotive PH5848 PureZone 8-57250 Purolator L25848 Purolator PureONE PL25848 PurolatorONE PL25848 Quaker State QS174 Service Champ CF5848 STP Filters S10515XL STP Filters S10515 Valvoline VO-99 Valvoline VO99 Warner WP982 Warner Filters WP982 Wix 57250 Wix 57042 Wix 57029 - Installation
- Remove drain plug from housing cap if present and allow oil to drain from cap. Remove housing cap old gaskets/O-Rings and filter element. Discard the used filter element and gaskets/O-Rings in the proper manner.
- Clean filter housing components and apply a light coating of clean engine oil to the new provided gaskets/O-Rings. Install being careful to avoid damage to the gaskets/O-Rings. Avoid twisting of the gaskets/O-Rings.
- Install new filter element into the housing cap. Reinstall the housing cap and tighten to the proper installation torque as listed on the housing cap or in the service manual. Reinstall the housing cap drain if present to the proper installation torque.