FRAM Extra Guard® Oil Filter
| Height (Inch) | 4.984 |
|---|---|
| Outside Diameter (Inch) | 2.984 |
| Anti-Drain Back Valve | Yes |
| Bypass Relief Valve | No |
| Gasket Inside Diameter (Inch) | 2.469 |
| Gasket Outside Diameter (Inch) | 2.750 |
| Gasket Thickness (Inch) | 0.188 |
| Gasket Type | Base |
| Attachment Type | Spin-On |
| Burst Pressure (Pounds per Square Inch) | 300.000 |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inlet Type | Threaded |
| Inside Thread Diameter (Millimeter) | M20x1.5 |
| Thread Size | Metric |
| Torque Nut | No |
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 92-91 PORSCHE 911 H6-3.3L 94-93 PORSCHE 911 H6-3.6L 88-87 PORSCHE 924 L4-2.5L 89-83 PORSCHE 944 L4-2.5L 1989 PORSCHE 944 L4-2.7L 91-89 PORSCHE 944 L4-3.0L 95-92 PORSCHE 968 L4-3.0L - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF2055 Beck/Arnley 041-8089 Big A 92287 Bosch 72158 Car Care OF6941 Carquest 85287 Cenex CO2855 Champ PH2855 Champion COS6941 Champion Filters COS6941 Crosland 2098 Deutsch D602 FERGUSON R1287 FVP R1287 Girling F6607 Grand Prix PH2855 Group 7 L30165 Hastings LF586 IAPCO OF922 Installer Edge AL6941 Jiffy Lube JL165 Jiffy Lube HL6941 K&N HP-4001 Knecht OC142 Kralinator L268 LUBER-FINER PH2855 MAHLE OC142 MAHLE OC75 Mann-Filter W719/22 Mighty Distributing System M2855 Mighty Distributing System PH2855 Mighty Distributing System L30165 Mobil L30165 Mobil 1 M1-401 NAPA 1287 Pentius PLB6941 Performax PO-143 Phillips 66 WO1287 Purolator L30165 Quaker State PO-143 Quaker State L30165 Security Filters PH2855 Shell - Archived L30165 STP S6941 STP Filters S6941 Unocal 76 OF1287 Valvoline PH6941 Valvoline 944 107 201 05 Valvoline L-2855 Valvoline VO-135 Volkswagen 944 107 201 06 Volkswagen 944 107 201 03 Volkswagen 944 107 201 02 Volkswagen 944 107 201 07 Volkswagen 944 107 201 05 Volkswagen 944 107 201 08 Volkswagen 944 107 201 90 Warner PH2855 Warner Filters PH2855 Wix 51287 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.