FRAM Extra Guard® Oil Filter
| Height (Inch) | 3.329 |
|---|---|
| Outside Diameter (Inch) | 4.109 |
| Anti-Drain Back Valve | Yes |
| Bypass Relief Valve | Yes |
| Gasket Inside Diameter (Inch) | 2.758 |
| Gasket Outside Diameter | 3.144 |
| Gasket Thickness (Inch) | 0.094 |
| Gasket Type | Base |
| Attachment Type | Spin-On |
| Burst Pressure (Pounds per Square Inch) | 250.000 |
| Bypass Relief Valve Setting (Pounds per Square Inch) | 8 |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inlet Type | Threaded |
| Inside Thread Diameter (Millimeter) | M24x1.5 |
| Thread Size | Metric |
| Torque Nut | No |
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 86-85 TOYOTA CAMRY L4-1.8L 1986 TOYOTA CAMRY L4-2.0L 1985 TOYOTA COROLLA L4-1.8L TOYOTA Liteace (CM30/36, CR21/27) (w/2.0D 2C Engine) YANMAR 6LPDTE YANMAR 6LPDTZE YANMAR 6LPSTE YANMAR 6LPSTZE - Comparison
COMPETITOR NAME COMPETITOR PART # ACDelco PF2107 Baldwin BD7029 Beck/Arnley 041-8133 Beck/Arnley 041-0746 Big A 92368 Car Care OF6357 Carquest 85368 Cenex CO920 Champ PH920 Deutsch D512 Deutsch PH920 Donaldson P550597 Donaldson P502017 FERGUSON R1368 Fleetguard LF3849 FVP R1368 Girling F6589 Grand Prix PH920 Hastings BD7029 Hastings LF191 IAPCO A-0261-002 IPD 10102 ITM 111-1513 ITM 11-11513 ITM Autoparts 111-1513 ITM Autoparts 11-11513 Kralinator D324 Kralinator D325 Lazorlite L11-1902 LUBER-FINER PH920 LUBER-FINER LFP5971 Mann-Filter WP928/80 Mann-Filter WP914/80 Master Parts PH-920 Mighty Distributing System PH920 NAPA 1368 Security Filters PH920 STP PH920 STP Filters PH920 Toyota 90915-03003 Toyota 90915-30001 Toyota 90915-30002 Toyota 15600-64020 Vera 10-01220 Vera 10-01386 Warner PH920 Warner Filters PH920 Wix 51368 Wix 57254 Yanmar 119770-90620 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.