Toggle Nav
PARTS SEARCH
  • Compare Products
Menu
Account
Settings
Language
English
Back To Search Results

FRAM Extra Guard® Oil Filter

Add to Compare
SKU
PH6355
More Information
Height (Inch) 5.039
Outside Diameter (Inch) 3.969
Anti-Drain Back Valve Yes
Bypass Relief Valve Yes
Gasket Inside Diameter (Inch) 2.559
Gasket Outside Diameter (Inch) 2.953
Gasket Thickness (Inch) 0.394
Gasket Type O-Ring
Attachment Type Spin-On
Burst Pressure (Pounds per Square Inch) 350.000
Bypass Relief Valve Setting (Pounds per Square Inch) 20
Filter Media Material Cellulose/Synthetic Blend
Inlet Type Threaded
Inside Thread Diameter (Millimeter) M26x1.5
Thread Size Metric
Torque Nut No
More Information
Where To Shop
Search
  • Description

    FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).

    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
    • SureGrip® technology for easy install and removal
    • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
    • Silicone anti-drain back valve helps ensure safe engine start up

    *FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.

    **Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.

    ?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.

  • Applications

    This Item Fits the Following Vehicles:

    Year Make Model Engine
    87-85 FORD RANGER L4-2.3L
    HYUNDAI H-1, H-1 Starex 2.5D (w/D4BB Engine)
    HYUNDAI H100 2.5D (w/D4BA/F Engine)
    HYUNDAI H100 2.5D FDXV/W (w/D4B4 Engine)
    HYUNDAI H100 2.5D FDXV/W (w/D4BX Engine)
    HYUNDAI H100 2.5TD (P) (w/D48F Engine)
  • Comparison
    COMPETITOR NAME COMPETITOR PART #
    ACDelco PF2147
    Baldwin BD28
    Big A 92067
    Car Care OF6355
    Carquest 85067
    Chrysler MD069782
    Crosland 2087
    Donaldson P551343
    FERGUSON R1067
    Fleetguard LF3564
    FVP R1067
    Group 7 L34750
    Hastings LF147
    Kralinator D3
    LUBER-FINER LFP9930
    LUBER-FINER LFP805
    Mann-Filter WP928/81
    Mighty Distributing System L34750
    Mitsubishi MD069782
    Mitsubishi MD184086
    Mobil L34750
    Motorcraft FL-805
    NAPA 1067
    Purolator L34750
    Quaker State L34750
    Shell - Archived L34750
    STP LFP805
    STP Filters LFP805
    Valvoline VO-136
    Wix 51067
  • Installation
    1. Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
    2. Place a drain pan under the oil filter and unscrew oil filter.
    3. Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
    4. Apply film of clean oil to filter gasket. Do not use grease.
    5. Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
    6. Check owner’s manual for correct oil specification viscosity and amount.
    7. Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
    8. Shut off engine and recheck oil level after 5 minutes and top off as necessary.