FRAM Oil Filter
| Height (Inch) | 3.359 |
|---|---|
| Outside Diameter (Inch) | 3.000 |
| Anti-Drain Back Valve | Yes |
| Bypass Relief Valve | Yes |
| Gasket Inside Diameter (Inch) | 2.125 |
| Gasket Outside Diameter | 2.422 |
| Gasket Thickness (Inch) | 0.297 |
| Gasket Type | Base |
| Attachment Type | Spin-On |
| Bypass Relief Valve Setting (Pounds per Square Inch) | 12 |
| Filter Media Material | Cellulose/Synthetic Blend |
| Inlet Type | Threaded |
| Inside Thread Diameter (Millimeter) | M20x1.5 |
| Thread Size | Metric |
| Torque Nut | No |
Search
- Description
FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
*FRAM Group testing of average filter efficiency of PH8A, PH3387A and PH4967 under ISO 4548-12 for particles greater than 20 microns.
**Greater than 3X the functional life of Nitrile ADB when tested per SAE HS806 hot oil and Anti-drain-back test.
?Not all features are available on every part number in the product line. Check the package for specific features of individual filters.
- Applications
This Item Fits the Following Vehicles:
Year Make Model Engine 86-84 HONDA CB700SC NIGHTHAWK S All 1984 HONDA VF1000F INTERCEPTOR All 86-85 HONDA VF1000R All 86-83 HONDA VF1100C V65 MAGNA All 85-84 HONDA VF1100S V65 SABRE All 85-84 HONDA VF500C V30 MAGNA All 86-84 HONDA VF500F INTERCEPTOR All 87-84 HONDA VF700C MAGNA All 85-84 HONDA VF700F INTERCEPTOR All 85-84 HONDA VF700S SABRE All 1988 HONDA VF750C MAGNA All 83-82 HONDA VF750C V45 MAGNA All 84-83 HONDA VF750F V45 INTERCEPTOR All 83-82 HONDA VF750S V45 SABRE All 87-86 HONDA VFR700F INTERCEPTOR All 1986 HONDA VFR750F INTERCEPTOR All 88-85 HONDA VT1100C SHADOW All 86-83 HONDA VT500C SHADOW All 84-83 HONDA VT500FT ASCOT All 87-83 HONDA VT700C SHADOW All 1983 HONDA VT750C SHADOW All 1988 HONDA VT800C SHADOW All 90-85 KAWASAKI EN450A 454 LTD All 89-87 KAWASAKI EX500 All 1985 KAWASAKI VN700A VULCAN All 93-86 KAWASAKI VN750A VULCAN 750 All - Comparison
COMPETITOR NAME COMPETITOR PART # Amsoil EAO20 Big A 92389 Carquest 85389 Casite Filters CF3593 Champ PH7010 Crosland 672 Delphi FX1000 Dorcy 21-8065 Emgo 10-82200 Emgo 10-82210 Fleetguard LF3646 Fleetguard LF16211 FVP R1334A Gonher GP6811 Hastings LF547F Hastings LF146 Hastings LF194 Hastings B7487 Hastings LF547 Honda 15410-MB0-003 Honda 15410-MJ0-004 Honda 15410-MB3-003 Honda 15410-MJ0-003 Honda 15410-MJ0-405 K&N KN-202 Kawasaki 16097-1054 Kukje HRA1102000A3 LUBER-FINER PH7010 NAPA 1389 NAPA 1334 Purolator ML16810 Rockhill 61334 STP PH7010 Warner PH7010 Wix 51334 - Installation
- Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
- Place a drain pan under the oil filter and unscrew oil filter.
- Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket. Do not use grease.
- Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
- Check owner’s manual for correct oil specification viscosity and amount.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes and top off as necessary.